Anodized Powder Coating
Introduction：
It is suitable for anodic oxidation effect for product appearance, as well as environmental protectionrequirements such as Rohs and Reach.
Coating characteristics:
Good adhesion, excellent mechanical properties,tough coating film.
Coating film is Smooth and glossy
Good outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for a variety of products decoration and protection, such as: aluminum curtain wall, door and window frame, ceiling, etc
Spraying method:
high voltage electrostatic sprayin60-80KV
Recommended filmthickness:
60-80 um
Application parameters
Curing time
200Cx10–15mins
Standard Test Method For Itemizer：
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the performance index of .the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re -examined to be in good condition evenif it isfound to be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Send product request
Other supplier products
 |
Sand texture powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction MT-MY1841 Outdoor wood yellow sand pattern MT-MY1840 Outdoor orange sand ... |
|
|
Metallic matte MT-049/7B970 | Introduction No. MT-049/7B970 Color Metallic color Surface Metallic matte System Weather-resistant polyester Sco... |
 |
Polyester based powder coating MT-OA110G | Product Description MT-OA110G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI... |
|
|
Metallic plane MT-629/93627 | Introduction No. MT-629/93627 Color Black Surface Metallic plane System Resin imported from Austria Packing Spec... |
 |
High temperature resistant powder coating | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com MT-3072 Outdoor high temperature black sand texture MT-GW001 MT-GW002 MT-G... |
Same products
 |
5.4,4'-Oxydiphenol CAS 1965-09-9 | Seller: Yufeng International Group Co., Ltd | Product Name: 4,4'-Oxydiphenol Synonyms: 4,4'-Dihydroxydiphenyl ether 4,4'-Oxydiphenol Bis(4-... |
 |
1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Tetrachloroethane Acetylene te... |
 |
3.Chlorotrifluoroethylene (CTFE) CAS 79-38-9 | Seller: Yufeng International Group Co., Ltd | Synonyms: CHLOROTRIFLUOROETHYLENE 79-38-9 CTFE Chlorotrifluoroethene 1-Chloro-1,2,... |
 |
2.1,1,2-Trichloroethane CAS 79-00-5 | Seller: Yufeng International Group Co., Ltd | Product Name: 1, 1，2-Trichloroethane CAS: 79-00-5 Synonyms:79-00-5, Vinyltrichloride, beta-... |
 |
1.1,1,2,2-Tetrachloroethane CAS 79-34-5 | Seller: Yufeng International Group Co., Ltd | Product Description Product Name: 1, 1, 2, 2-Tetrachloroethane Synonyms: 79-34-5 s-Te... |
