Antimicrobial Powder Coatings

• 

Product performance:

long term Up to 4N- 5N

(99.99-99 .999%)

Application:

kitchen utensils: dishwasher, stove, cupboard, etc

Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc

Medical equipment: medical beds, etc

Spraying method:

high voltage electrostatic sprayin 60-80KV

Recommended film thickness:

60-80 um

Application parameters

Curing time

200°Cx10–15mins

STANDARD TEST METHOD FOR ITEMIZER

In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the, performance index of the film would change slightly with different gloss.

This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements .

Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is foundto be expired.

Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.

The results vary with environmental factors and other conditions.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Другие товары поставщика

	Chromium(III) phosphate STD-CP 4295	Chemical Structure Chromium(III) phosphate Anticorrosive pigment providing adhesion promotion based on Chromium(III) phosphate. Often used in co...
	Metallic sand texture matte MT-049/83099	Introduction No. MT-049/83099 Color Black Surface Metallic sand texture matte System Polyester Scope of applicat...
	High Insulation Epoxy Powder Coating	Engineered Surface Solutions for Every Application Powder coatings are formulated with different resin bases to meet diverse performance, aestheti...
	Polyurethane Powder Coating	1. Product Portfolio & Technical Classifications Our acrylic range is segmented by chemical resin bases and specialized performance series to ...
	Solid Acrylic Resin STD BM66	Introduction 1. BM66 is a copolymer of methyl methacrylate and n-butyl methacrylate. It offers hard heat resistance and durability. It also offers...

Похожие товары

	Easy-cleaning Silicone-Modified Waterborne UV Resin	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d...
	Water-based Soft-Touch Resin for Consumer Electronics	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve...
	Conformal Coatings	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro...
	Metalized & Laser Transfer coating	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ...
	Hydrophilic coatings for Air Conditioner	Продавец: Guangzhou Human New Material Science and Technology Co., Ltd	A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi...