Antimicrobial Powder Coatings
Product performance:
long term Up to 4N- 5N
(99.99-99 .999%)
Application:
kitchen utensils: dishwasher, stove, cupboard, etc
Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc
Medical equipment: medical beds, etc
Spraying method:
high voltage electrostatic sprayin 60-80KV
Recommended film thickness:
60-80 um
Application parameters
Curing time
200°Cx10–15mins
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um,and the, performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and otherheavy metals, and meets RoHS requirements .
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, thepowder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is foundto be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and donot represent the performance commitment of the product application.
The results vary with environmental factors and other conditions.
If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
在线联系供应商
Other supplier products
 |
Green Series Powder Coating | Introduction We deliver a wide range of green series powder coatings manufactured in China and trusted by global industrial buyers. Why Our Green... |
 |
Low Cure Powder Coating -coating powder manufacturer | Most powder coating chemistries required relatively high curing temperatures ranging from 350-400°F (177-204°C) for 5-20 minutes (substrate... |
 |
Phosphorus-free Antiscalant (inhibitor) MC 700-B | Performance and Use Phosphorus-free antiscalant (inhibitor) MC 700-B does not contain phosphorus. It can greatly reduce sewage treatment costs in ... |
 |
Polyamide Powder Coating for Building Materials | We supply a complete range of polyamide (nylon) powder coatings, including Nylon 6, 11, 12, and 1010, designed for demanding applications requiring... |
 |
High-performance corrosion protection powder coating | High-performance powder coatings for corrosion protection. MT’s primer product portfolio is designed to provide high corrosion resistance fo... |
Same products
 |
Easy-cleaning Silicone-Modified Waterborne UV Resin | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | LUV533 is a high-performance, silicone-modified hexafunctional waterborne UV resinengineered to d... |
 |
Water-based Soft-Touch Resin for Consumer Electronics | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Water-based Soft-Touch Resinis an advanced coating material formulated to deliver a luxurious, ve... |
 |
Conformal Coatings | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | The conformal coatingsprovide good adhesion to metal, PCB and other substrates after curing at ro... |
 |
Metalized & Laser Transfer coating | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | Metallized and laser transfer coatingsare designed with sustainability in mind, ensuring minimal ... |
 |
Hydrophilic coatings for Air Conditioner | 卖方: Guangzhou Human New Material Science and Technology Co., Ltd | A water-based coating combination applied on the surface of aluminum foil, which forms a layer wi... |
