Blue flash silver color powder coating
COLORS AVAILABLE
RAL colors coating powder
Pantone colors
Color-matching regarding customer requirement is available
GENERAL TYPES
Polyester /Hybrid powder coating
Epoxy Powder coating color
Metallic powder coating color
Hammer tone color powder coating
Texture color powder coating powder
Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.
PHYSICAL PROPERTIES
Specific gravity :1.2 ~1.8g/cm3 up to colors
Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)
Level of liquidity:24 ~27 mm
CURING CONDITIONS
180 °C ~200 °C (work piece temperature), 10-15 minutes
AVERAGE COVERAGE
8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate).
PACKING
Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.
STORAGE AND TRANSPORT
Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.
HEALTH AND SAFETY
Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating
| Mechanical property | ||
| Testing items | Standards and methods | Inspecting index |
| Impact strength | GB/T1732-1993. AS3715 2.8 | >50kg/cm |
| Bending resistance | GB/T1185-88. AS1580 402.1. ISO9227 | Pass 2-5 millimeters |
| Adhesion CHECKED TEST | GB/T9286-88.2mm Cross cut, ISO2409 | Pass100/100. passes 0levels |
| Cupdrawing:Erichsen, ISO1520 | Erichsen, ISO1520 | Pass 3-7 millimeters |
| Pencil hardness | GB/T6739-86 | Pass H-2H |
| Chemical resistance and weather resistance | ||
| Salt spray test | GB/T1771-91.500 hours | The cross section of corrosion less than 2MM |
| Hot and damp resistance test | GB/T,1000 hours | Without air bubbles, loses the light slightly |
| Acid resistance | 10% CH3COOH, 240 hours | Without air bubbles, the surface without damage |
| Alkali resistance | 10% NaOH, 240 hours | Without air bubbles, the surface without damage |
| Heat resistance | 200degree,1 hour | The color change is lower than E=1.5 |
| Solvent resistance | MEK24 hours soaked in solvent-free | Without air bubbles, the surface without damage |
| Uvioresistant | QUV-313.500 hours | Gloss higher than 80% lower than the
Munsell color change level |
| Water tolerance of | 2 hours | No bubble, not falling, losing light |
If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
|
|
Metallic flat high gloss MT-049/98010 | Introduction No. MT-049/98010 Color Metallic color Surface Metallic flat high gloss System Polyester Scope of ap... |
|
|
Platinum Powder Coating | Innovative Powder Coatings that Perform as Well as They Look STD. Platinum represents a breakthrough in powder coating technology. Coatings offer ... |
 |
Instrument powder Coating | Introduction It is made of polyester resin and epoxy resin as the main base materials, and has the excellent decorative, mechanical properties and... |
|
|
15-year outdoor warranty high weather resistant powder | Introduction： Complete range of products with rich colors. Orders can be placed directly according to PANTONG / RAL / architectural color cards. ... |
 |
Kitchen supplies powder coating | Introduction Characteristics of powder coatings “It does not contain toxic, solvent free, or volatile toxic substances, so it does not ha... |
