.

Blue flash silver color powder coating

COLORS AVAILABLE

RAL colors coating powder

Pantone colors

Color-matching regarding customer requirement is available

GENERAL TYPES

Polyester /Hybrid powder coating

Epoxy Powder coating color

Metallic powder coating color

Hammer tone color powder coating

Texture color powder coating powder

Textures include sand grain, hammer, silk pattern, sand textured, marble,metallic, multi-color.

PHYSICAL PROPERTIES

Specific gravity :1.2 ~1.8g/cm3 up to colors

Particle size distribution:100% less than 100 microns (depending on the specific indicators art effects may be, according to the special requirements of painting adjusted)

Level of liquidity:24 ~27 mm

CURING CONDITIONS

180 °C ~200 °C (work piece temperature), 10-15 minutes

AVERAGE COVERAGE

8-12 square meters /kg, thickness 60 microns (100% of the powder coating utilization rate).

PACKING

Outside carton lined with two layers of polyethylene bags, each containing 20 kg net weight.

STORAGE AND TRANSPORT

Stored in less than 30 °C, ventilated, dry, clean room, not near the fire source, heating, avoid direct sunlight, the product in the transport should be to prevent rain, sun, prolonged sun exposure.Storage products in line with the above conditions, since the date of production, effective storage period is 6months.Over the storage period may be re-tested and the results were consistent with, can still be used.

HEALTH AND SAFETY

Coating powder is anon-toxic products, but should be avoided in the course of inhalation of dust.Proposed operators wear appropriate dust mask, glasses.If possible, try to avoid long-term skin contact with powder coating

Mechanical property
Testing items Standards and methods Inspecting index
Impact strength GB/T1732-1993. AS3715 2.8 >50kg/cm
Bending resistance GB/T1185-88. AS1580 402.1. ISO9227 Pass 2-5 millimeters
Adhesion CHECKED TEST GB/T9286-88.2mm Cross cut, ISO2409 Pass100/100. passes 0levels
Cupdrawing:Erichsen, ISO1520 Erichsen, ISO1520 Pass 3-7 millimeters
Pencil hardness GB/T6739-86 Pass H-2H
Chemical resistance and weather resistance
Salt spray test GB/T1771-91.500 hours The cross section of corrosion less than 2MM
Hot and damp resistance test GB/T,1000 hours Without air bubbles, loses the light slightly
Acid resistance 10% CH3COOH, 240 hours Without air bubbles, the surface without damage
Alkali resistance 10% NaOH, 240 hours Without air bubbles, the surface without damage
Heat resistance 200degree,1 hour The color change is lower than E=1.5
Solvent resistance MEK24 hours soaked in solvent-free Without air bubbles, the surface without damage
Uvioresistant QUV-313.500 hours Gloss higher than 80% lower than the

Munsell color change level

Water tolerance of 2 hours No bubble, not falling, losing light

If you're ready to take the next step, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.


在线联系供应商

至: Standard International Group (HK) Limited
Your E-mail:
消息正文:


Send to other suppliers

Other supplier products

Polyurethane waterproof coating A STD-939
Polyurethane waterproof coating A STD-939 Product Description The polyurethane prepolymer has a high resin content with excellent ratio of NCO, which can form a highly dense and elastic wa...
Bridge powder coating
Bridge powder coating Introduction Characteristics of powder coatings 1. The coating film is flat and smooth; 2. The paint film has good physical and mechanical pro...
Villa Elevator Powder Coating
Villa Elevator Powder Coating Introduction Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista...
Specialty Powder Coatings for the Automotive Sector
Specialty Powder Coatings for the Automotive Sector Introduction Product SegmentationApplication Fields Weather-Resistant Decorative Powder for Vehicle Exterior Whole vehicle coatings fo...
Chrome-silver-effect polyurethane powder coatings MT-200 Cr
Chrome-silver-effect polyurethane powder coatings MT-200 Cr Product description MT-200 Cr is a series of polyurethane-based powder coatings designed for the exterior environment offering excellent corrosion...
供应产品

Same products

蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感
蓝翠鸟威尼斯灰泥涂料 墙面艺术灰泥 奢华质感 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 蓝翠鸟威尼斯灰泥是商业空间与艺术场馆优选的艺术涂装材料,以精选天然石膏、环保水性成膜物质为原料,肌理独特且富有层次感,耐擦洗、易维护,适配商业展厅墙面、艺术画廊展墙、高端餐厅主题墙面...
蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆
蓝翠鸟天鹅绒纹理漆 室内设计高级感墙面装饰漆 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 这是一款为空间注入情绪的涂料。天鹅绒般柔和的哑光表面,拥有安抚视觉和心灵的效果,能自然营造出宁静、安全、包裹感的氛围。特别适用于打造家庭阅读角、私人工作室、瑜伽室或任何您需要放松...
蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料
蓝翠鸟 水包砂 | 高弹抗裂 外墙专用涂料 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 蓝翠鸟高弹抗裂水包砂,专为应对墙体细微开裂问题而设计。其涂层具备优异的弹性与延展性,能有效桥接并遮盖基层微裂缝,适用于易产生温度应力或轻微沉降的建筑外墙,提供持久的完美外观。 ...
蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料
蓝翠鸟 简修天鹅绒覆盖漆 | 旧墙翻新神器 遮盖涂料 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 厌倦了老旧的墙面?蓝翠鸟简修天鹅绒漆是您的快速翻新方案。它拥有超强的遮盖力和附着力,能直接覆盖大多数旧墙面(如乳胶漆、腻子层),简化施工步骤。快速赋予老旧空间全新的天鹅绒质感与现...
商业空间用瓷砖胶——高效施工、耐磨耐用
商业空间用瓷砖胶——高效施工、耐磨耐用 卖方: 中山蓝翠鸟新型环保材料有限公司 产品概述 瓷砖胶是适用于商场、酒店、写字楼等商业空间的专业粘结材料,以优质水泥、级配石英砂、特种聚合物改性剂为原料,采用薄贴工艺实现高效贴砖,提升施工效率,且具备优异耐磨性,可承受高人流量磨损...