Hyper-durable powder coatings
Product Description
MT- D3020Gen II is a series of hyper-durable powder coatings designed to meet the requirements of AAMA2605. the most demanding architectural specification in the world. MT- D3020Gen II technology uses innovative fluorocarbon polymer chemistry that is designed to provide maximum gloss and colour retention in service. MT- D3020Gen II is also designed to provide excellent cosmetic and functional protection whilst exploiting the recognised benefits of powder coatings. MT- D3020Gen II is a technically and environmentally benign alternative to liquid PVF2 systems. MT- D3020Gen II is available in a selected range of colours and pearlescent effects and in a subtle low sheen finish.
Powder Properties
| Appearance | Smooth Matt |
| Gloss level | 20 – 30 gloss units (60°) |
| Particle size | Suitable for electrostatic spray |
| Specific gravity | 1.2-1.7 g/cm³ depending on colour |
| Storage | Dry cool conditions below 25°C |
| Shelf life | 6 months |
| Sales code | 8 series |
| Stoving Schedule | 30 – 40 minutes at 190°C
or 20 – 30 minutes at 200°C or 15 – 25 minutes at 210°C (object temperature) Do not cure above 210°C |
Mechanical Tests
| Dry Adhesion | AAMA2605 8.4 | Pass – no removal of film |
| Impact Resistance | AAMA2605 8.5 | Pass – no tape removal of film from substrate following 3mm deformation |
| Dry Film Hardness | ISO2815 (Buchholz) | Pass |
| Abrasion Resistance | AAMA2605-13 8.6 | Pass – abrasion coefficient >40 |
Pre-treatment
For maximum protection it is essential to pre-treat components prior to the application of MT- D3020 Gen II in accordance with the MT-D Approved Applicator Manual. Aluminium components must receive a full multi-stage chromate conversion coating or suitable chrome-free pre treatment to clean and condition the substrate. Detailed advice should be sought from the pre-treatment supplier.
Application – Cleanup
Below are some recommendations for minimising the risk of cross contamination of MT-D3020 Gen II with powders based on other chemistries such as polyester:
If possible, use a dedicated spray to waste booth if not reclaiming.
Ensure thorough cleaning of spray booth, duct work, cyclone (if within system) and all powder application equipment (guns, hoses, pumps, hoppers, etc) before and after applying MT-D3020 powders.
Clean wet rags should be used for a final wipe down on the inside of the booth and feed hopper.
When returning to application of polyester powders after a MT-D3020 run, shoot foam blocks through hoses and flush guns with next powder to remove any traces of fluorocarbon, and spray this powder to waste before reclaiming.
If reclaiming powder after MT-D3020 run, check reclaim powder for contamination before reuse.
Where possible isolate the application of MT-D3020 from other production eg. use at weekends or on night shift when no other production is taking place.
Operators should wear dedicated protective clothes for MT-D3020 application. At other times, these should be stored in sealed containers.
MT-D3020 can be stored along with other powder so long as it is in sealed containers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
High Reflectivity (Infrared Camouflage Cooling) Powder Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Reflective Cooling Effect Reflects >90% of solar i... |
 |
Rim Powder Coating | Introduction Aesthetic and Functional Excellence: The coating provides an aesthetically pleasing and uniform finish with excellent weather resista... |
 |
Low temperature environmentally friendly pure polyester/PRIMID powder coating | Product Description This series of products uses saturated polyester resin and Primid curing agent as the main base material to make thermosetting... |
 |
Automobile spring powder coating/powder coat company | Brief description: Made of saturated polyester resin, epoxy resin or epoxy polyester mixed type as base material. Features: Excellent physical a... |
 |
Gray Matte Powder Coating | Key attributes ItemsInformation CAS No. 53808-41-6 Place of Origin China Main Raw Material EPOXY Usage Furniture Pai... |
Похожие товары
 |
Core Drill Bits For Stone | Продавец: Hebei XMF Tools Group Co., Ltd | Our Core Drill Bits for Stoneare designed for professional cutting and drilling of granite, marbl... |
 |
Uphone L181 4G Rugged PoC Radio Entry Level IP68 | Продавец: Shenzhen Tianlong Century Technology Development CO., LTD | Uphone L181 4G Rugged PoC Radio Entry Level IP68 Uphone L181 4G Rugged PoC Radio – Entry-L... |
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Продавец: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
