Reverse Osmosis Membrane Flocculant STD-403

• 

Performance and use

Reverse osmosis flocculant STD-403 is a high-efficiency liquid flocculant, mainly used in reverse osmosis pretreatment system; added to the front end of the multi-media filter, it has a significant effect on reducing the SDI value of reverse osmosis influent, especially for surface water with high organic matter content.
It is suitable for a wide range of pH values in water, has a fast coagulation speed, has a large and solid coagulation density, and has good sedimentation properties.
STD membrane flocculant can increase the solid-liquid separation speed and extend the filter working cycle during direct filtration.
Miscible with water in any proportion.

Technical indicators

How to use

STD-403 must be added at the front end of the multi-media filter to achieve flocculation and sedimentation.
The product works better in water with high pH value; the product has no special requirements for dosing system and materials.

Dosage Instructions

Usually the dilution ratio is required to be less than 10 times, or the reverse osmosis flocculant is added in the original solution. This depends on the configuration of the dosing system. Before dosing, please consult with STD technicians.
The technicians recommend the appropriate dosage according to the water quality and process characteristics, and obtain better results through on-site debugging. The general dosage is 3-9ppm.
The addition point of the agent should be selected far away from the filter inlet (5.0-7.0 meters), and the injection point should be selected in the center of the water flow pipe, so as to ensure uniform mixing of the agent when the water is turbulent.

Packaging and storage

Packaged in plastic barrels, 25kg or 20kg/barrel.

The physical and chemical properties of STD membrane flocculant are stable. It can be stored in a cool place with a storage period of 1 year.

Safety and protection

STD-403 is weakly acidic. Pay attention to labor protection during operation to avoid contact between the flocculant and skin, eyes, etc. Rinse with plenty of water after contact.

If you're ready to take the next step or Request Free Samples, Leave your message below and we’ll reply soon. 20+ years of chemical manufacturing & export experience, a partner you can trust.

Другие товары поставщика

	Antistatic powder coating	Application parameters: Curing time:200℃×10–15 minutes Spraying method:High voltage electrostatic spraying 60-80 KV Recommended film...
	Polyester based powder coating MT-JA010G White	Product Description MT-JA010G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ...
	Patterned Powder Coating	Introduction We are a professional powder coating manufacturer in China, specializing in custom patterned powder coatings for industrial and decor...
	Metallic matte MT-019/92039	Introduction No. MT-019/92039 Color Metallic color Surface Metallic matte System Weather-resistant polyester Sco...
	Metallic plane MT-049/94501	Introduction No. MT-049/94501 Color Gray Surface Metallic plane System Resin imported from Austria Packing Speci...

Похожие товары

	High Concentration Plastic Color Masterbatch Factory Direct Supply	Продавец: 861445	We are a professional color masterbatch manufacturer with years of R&D experience in plastic ...
	Acid Ink Blue G Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ...
	Acid Black ATT Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o...
	Acid Black 10B Factory	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri...
	Sulphur Dyes	Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD	Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ...