Powder Coatings on Aluminumanti-static powder coating factory
Features:
Outstanding water resistance and anti-corrosion;
Excellent weather resistance and anti-scratching;
Excellent overbake resistance
Powder Coatings for Aluminum: Technical Overview
| Category | Specifications |
|---|---|
| Definition | Dry finishing process applying protective/decorative polymer powder to aluminum substrates |
| Key Benefits | Corrosion resistance, UV protection, aesthetic versatility |
Coating Types Comparison
| Coating Type | Advantages | Limitations | Typical Applications |
|---|---|---|---|
| Polyester-TGIC Free | Excellent weatherability REACH compliant |
Moderate chemical resistance | Architectural extrusions Window frames |
| Polyurethane | Superior abrasion resistance High gloss retention |
Higher cost | Automotive trim Marine components |
| Epoxy | Best chemical resistance Strong adhesion |
Poor UV stability | Industrial equipment Electrical enclosures |
| Hybrid (Epoxy-Polyester) | Balanced properties Cost-effective |
Limited outdoor use | Indoor furniture Consumer electronics |
Surface Preparation Standards
| Process | Parameters | Purpose |
|---|---|---|
| Alkaline Cleaning | pH 9-11. 50-60°C | Remove oils/contaminants |
| Chromate Conversion | 30-90 sec immersion | Enhance adhesion/corrosion resistance |
| Non-Chromate Pretreatment | Zr/Ti based alternatives | Eco-friendly option |
| Rinsing | DI water, <50 ppm impurities | Prevent staining |
Application Parameters
| Parameter | Requirements | Equipment |
|---|---|---|
| Film Thickness | 60-120 μm | Eddy current gauge |
| Curing Schedule | 180°C × 15 min | Convection oven |
| Transfer Efficiency | 70-85% | Electrostatic gun |
| Pre-heat | 100-120°C × 5 min | For complex geometries |
Performance Standards
| Test | Requirement | Method |
|---|---|---|
| Salt Spray | 1000h (Class 9) | ASTM B117 |
| QUV Weathering | ΔE<3 after 2000h | ASTM G154 |
| Adhesion | 5B (cross-cut) | ASTM D3359 |
| Bend Test | 2T pass | ASTM D522 |
Color & Finish Options
| Option | Characteristics | Gloss Range |
|---|---|---|
| Metallic | Aluminum flake effects | 20-80% |
| Matte | Non-reflective surface | 10-30% |
| Textured | Hammer-tone patterns | 15-40% |
| Clear Coat | Substrate visibility | 85-95% |
Industry Applications
| Sector | Components | Key Requirements |
|---|---|---|
| Architecture | Curtain walls, roofing | Weather resistance |
| Transportation | Vehicle panels, railings | Impact resistance |
| Consumer Goods | Electronics housings | Aesthetic quality |
| Industrial | Heat sinks, machinery | Thermal stability |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Thermosetting flat powder coating | Product Introduction MT thermosetting flat powder coating adopts advanced polymer formula technology to form a dense and smooth coating through hi... |
 |
Thin Coating Powder Series | Introduction Key Features & Specifications FeatureSpecification / Benefit Ultra-Thin Film Formation Achieves30–50μm film... |
 |
Weather-resistant powder coatings | Product description: This series of products uses saturated polyester resin and acrylic resin as the main base materials to make thermosetting pow... |
 |
Polyester based powder coating MT-JA020G White | Product Description MT-JA020G is a polyester based powder coating, formulated using TGIC and is designed for exterior exposure offering excellent ... |
 |
Automotive headlamp reflectors powder coating MT-A1270/MT-HZG04R | Product Description The visual effect achieved from the final headlamp reflector is of the utmost importance and a quality powder primer is the ke... |
Похожие товары
 |
High Concentration Plastic Color Masterbatch Factory Direct Supply | Продавец: 861445 | We are a professional color masterbatch manufacturer with years of R&D experience in plastic ... |
 |
Acid Ink Blue G Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Ink Blue G Factory 【Application of Acid Ink Blue G 】 mainly used for making blue or ... |
 |
Acid Black ATT Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black ATT Factory 【What’s Acid Black ATT】 is made of acid black 10B and acid o... |
 |
Acid Black 10B Factory | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Acid Black 10B Factory is mainly suitable for dyeing and printing wool ,silk and nylon fabri... |
 |
Sulphur Dyes | Продавец: TIANJIN LEADING IMPORT & EXPORT CO., LTD | Sulphur Dyes BuyDye supplies a range of sulphur dyes for cotton-based textile dyeing, includ... |
