Powder Coatings on Aluminum-anti-static powder coating factory
Features:
Outstanding water resistance and anti-corrosion;
Excellent weather resistance and anti-scratching;
Excellent overbake resistance
Powder Coatings for Aluminum: Technical Overview
| Category | Specifications |
|---|---|
| Definition | Dry finishing process applying protective/decorative polymer powder to aluminum substrates |
| Key Benefits | Corrosion resistance, UV protection, aesthetic versatility |
Coating Types Comparison
| Coating Type | Advantages | Limitations | Typical Applications |
|---|---|---|---|
| Polyester-TGIC Free | Excellent weatherability REACH compliant |
Moderate chemical resistance | Architectural extrusions Window frames |
| Polyurethane | Superior abrasion resistance High gloss retention |
Higher cost | Automotive trim Marine components |
| Epoxy | Best chemical resistance Strong adhesion |
Poor UV stability | Industrial equipment Electrical enclosures |
| Hybrid (Epoxy-Polyester) | Balanced properties Cost-effective |
Limited outdoor use | Indoor furniture Consumer electronics |
Surface Preparation Standards
| Process | Parameters | Purpose |
|---|---|---|
| Alkaline Cleaning | pH 9-11. 50-60°C | Remove oils/contaminants |
| Chromate Conversion | 30-90 sec immersion | Enhance adhesion/corrosion resistance |
| Non-Chromate Pretreatment | Zr/Ti based alternatives | Eco-friendly option |
| Rinsing | DI water, <50 ppm impurities | Prevent staining |
Application Parameters
| Parameter | Requirements | Equipment |
|---|---|---|
| Film Thickness | 60-120 μm | Eddy current gauge |
| Curing Schedule | 180°C × 15 min | Convection oven |
| Transfer Efficiency | 70-85% | Electrostatic gun |
| Pre-heat | 100-120°C × 5 min | For complex geometries |
Performance Standards
| Test | Requirement | Method |
|---|---|---|
| Salt Spray | 1000h (Class 9) | ASTM B117 |
| QUV Weathering | ΔE<3 after 2000h | ASTM G154 |
| Adhesion | 5B (cross-cut) | ASTM D3359 |
| Bend Test | 2T pass | ASTM D522 |
Color & Finish Options
| Option | Characteristics | Gloss Range |
|---|---|---|
| Metallic | Aluminum flake effects | 20-80% |
| Matte | Non-reflective surface | 10-30% |
| Textured | Hammer-tone patterns | 15-40% |
| Clear Coat | Substrate visibility | 85-95% |
Industry Applications
| Sector | Components | Key Requirements |
|---|---|---|
| Architecture | Curtain walls, roofing | Weather resistance |
| Transportation | Vehicle panels, railings | Impact resistance |
| Consumer Goods | Electronics housings | Aesthetic quality |
| Industrial | Heat sinks, machinery | Thermal stability |
Send product request
Other supplier products
 |
Aluminum Extrusion Powder Coating | Product Features Excellent Adhesion, Flexibility, Impact Resistance, and High Hardness: The coating provides superior durability and toughness. S... |
 |
Polyurethane Powder Coatings | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance... |
 |
Epoxy-Polyester Thermosetting Electrostatic Spray Powder Coating | Product Overview Model: MT-062A Yellow powder coating Epoxy-polyester thermosetting electrostatic spray powder coating is a hybrid material combi... |
 |
Polyester-Epoxy Powder Coating | Product Introduction:This series of products is a thermosetting powder coating formulated from a mixture of saturated polyester resin, correspondin... |
 |
Medium Cure Powder Coating | We are a leading powder coating manufacturer specializing in Medium Cure Powder Coating that cures at moderate temperatures, offering an optimal ba... |
Same products
 |
Hot Melt Adhesive for Vacuum Insulation Panels | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ... |
 |
Hot Melt Adhesive for Packaging | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i... |
 |
Hot Melt Adhesive for Hygiene Products | Seller: Foshan Rurga New Material Technology Co. ,Ltd | Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ... |
 |
LSAW Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | LSAW Steel Pipe & Tube , or Longitudinal Submerged Arc-Welding Pipe (also known as SAWL ... |
 |
Anti-Corrosion Steel Pipe & Tube | Seller: HEBEI TIRICO PIPELINE CO.,LTD | Anti-Corrosion Steel Pipe & Tube Anti-Corrosion Steel Pipe & Tube What Is an Anti... |
