Spray Polished Rod
Spray Polished Rod
Function of Polish Rod
Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top of sucker rod,need to bear the most strength,sowith bigger diameter and highersteel gradethan sucker rod,and the surfaceis very smooth.
We also provide:API AISI 4140 Polished Rod,3/4" Polished Rod.
Main function:
Combined with packing set in packing box to seal wellhead and prevent oil、gas、water disclosure.
Interim connector between sucker rod and mule head hanger.
Finishing indicator diagram test.
Complete various wellhead operation,such as pump striking,regulating pump setting.
CHEMICAL COMPOSITION
Sucker rod manufacturer:Found Petroleum Equipment
Type specification table:
|
Nominal value |
Rod body diameter D+0.127-0.254（+0.005-0.010）mm（in) |
Length Lmm士 50mm （Lft 士 2in) |
Thread nominal diameter mm（in） |
mm (in） Outer thread shoulder outer diameter |
Suitable sucker rod size mm (in) |
|
29 |
|
2438, 3353, 4877, 6707, 7315, 7925(8, 11. 16. 22. 24 , 26) |
24 （15/16） PR |
一 |
16 (5/8) |
|
27 （1 1/16） PR |
一 |
19 (3/4) |
|||
|
29 |
|
2438, 3353, 4877, 6707 , 7315, 7925 (8. 11, 16. 22 , 24 , 26) |
24 (15/16 ) SR |
16 (5/8) |
|
|
27 (1 1/16 ) SR |
19 (3/4) |
||||
|
32 |
|
3353, 4877， ,6707，7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) PR |
一 |
22(7/8) |
|
32 |
|
3353, 4877， ,6707，7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) SR |
22(7/8) |
|
|
38 |
|
4877, 6707，7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
35（1 3/8）PR |
一 |
25(1) |
|
38 |
|
4877, 6707，7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
40（1 9/16）SR |
29(1 1/8) |
Mechanical Property OF Stainless steel polished rod:
|
Mechanical Property OF Steel Polished Rod |
|||||||||||
|
GRADE |
Minimum Yield Strength(0.2% Residual Deformation） |
Minimum Tensile Strength |
Maxmum Tensile Strength |
Elongation200mm% |
Reduction of Area Z% |
HRC |
HB |
Fatigue Life |
|||
|
psi |
MPa |
psi |
MPa |
psi |
MPa |
≥13 |
≥50 |
≥1.0X106 |
|||
|
C |
60000 |
414 |
90000 |
621 |
115000 |
793 |
≥13 |
≥50 |
|||
|
D |
85000 |
586 |
115000 |
793 |
140000 |
965 |
≥13 |
≥50 |
|||
|
KD |
85000 |
590 |
115000 |
795 |
140000 |
965 |
≥13 |
≥50 |
|||
|
H |
115000 |
795 |
140000 |
965 |
173339 |
1195 |
≥13 |
≥45 |
|||
|
EHL |
/ |
/ |
188500 |
1300 |
217500 |
1500 |
/ |
/ |
≥50 |
≥320 |
≥2.5X106 |
|
Note: When the minimum yield strength cannot be measured, it should be considered to be processed into standard sample and install extensometer to measure. |
|||||||||||
|
a It is generally made of high quality carbon steel, which can reach the mechanical properties of the table b A molybdenum steel (but not limited to this type of steel) is generally used, and the effective heat treatment can achieve the mechanical properties of this table |
|||||||||||
Chemical Composition OF Commonly Used Sucker Rod:
|
Chemical Composition OF Commonly Used Sucker Rod |
|||||||||||
|
AISI |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
V |
Cu |
Al |
|
4130 |
≤0.025 |
≤0.025 |
≤0.3 |
/ |
≤0.2 |
/ |
|||||
|
4140 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
|
4142 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
|
4330 |
≤0.025 |
≤0.025 |
≤0.2 |
/ |
|||||||
|
4720 |
≤0.025 |
≤0.025 |
|||||||||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
main rib drill pipe | How to maintain the phenomenon of wear of the main rib drill pipe? Shared by. In ultra-deep Wells, high-slant Wells, long-displacement Wells and h... |
 |
Grade D Sucker Rod | Grade D Sucker Rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from China leading manufacturer. Our products are ef... |
 |
Spray Anti-corrosion Sucker Rod | Spray Anti-corrosion Sucker Rod It is a kind of manufacturability anti-corrosion sucker rod, the rod surface spraying a layer of special anti-corro... |
 |
"Rebirth door" for scrapped rod | "Rebirth door" for scrapped rod The following shared by. What process does a discarded rod use to make it new and usable? A few days ago,4 Nigerian... |
 |
China Sucker Rod | Spray Anti-corrosion Sucker Rod It is a kind of manufacturability anti-corrosion sucker rod, the rod surface spraying a layer of special anti-corro... |
Похожие товары
 |
KLUBER LECTRIC KR 44-102 1KG Grease | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | NSK LR380G/PC 20PC,50PC/Carton NSK AS280G/PC 20PC,50PC/Carton NSK LG280G/PC 20PC,50PC/Carton N... |
 |
KLUBER ISOFLEX TOPAS NCA52 75G Grease | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | “LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7... |
 |
Kluber ISOFLEX TOPAS L 32CN 1KG Grease for Pick and Place Machine | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | NSK LR380G/PC 20PC,50PC/Carton NSK AS280G/PC 20PC,50PC/Carton NSK LG280G/PC 20PC,50PC/Carton N... |
 |
BQH 72-102 grease 1KG for Pick and Place Machine | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | N990pana-023 Panasonic MP Grease Kluber Isoflex Nbu 15 Grease Afc Lubricant K3036c K48-M3856-0... |
 |
LDS 18 1kg kluber Lubricants for SMT Machine | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | We are a professional supplier of SMT production line product. We supply various SMT Machine (SMT... |
