Spray Polished Rod
Spray Polished Rod
Function of Polish Rod
Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top of sucker rod,need to bear the most strength,sowith bigger diameter and highersteel gradethan sucker rod,and the surfaceis very smooth.
We also provide:API AISI 4140 Polished Rod,3/4" Polished Rod.
Main function:
Combined with packing set in packing box to seal wellhead and prevent oil、gas、water disclosure.
Interim connector between sucker rod and mule head hanger.
Finishing indicator diagram test.
Complete various wellhead operation,such as pump striking,regulating pump setting.
CHEMICAL COMPOSITION
Sucker rod manufacturer:Found Petroleum Equipment
Type specification table:
Nominal value |
Rod body diameter D+0.127-0.254(+0.005-0.010)mm(in) |
Length Lmm士 50mm (Lft 士 2in) |
Thread nominal diameter mm(in) |
mm (in) Outer thread shoulder outer diameter |
Suitable sucker rod size mm (in) |
29 |
|
2438, 3353, 4877, 6707, 7315, 7925(8, 11. 16. 22. 24 , 26) |
24 (15/16) PR |
一 |
16 (5/8) |
27 (1 1/16) PR |
一 |
19 (3/4) |
|||
29 |
|
2438, 3353, 4877, 6707 , 7315, 7925 (8. 11, 16. 22 , 24 , 26) |
24 (15/16 ) SR |
16 (5/8) |
|
27 (1 1/16 ) SR |
19 (3/4) |
||||
32 |
|
3353, 4877, ,6707,7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) PR |
一 |
22(7/8) |
32 |
|
3353, 4877, ,6707,7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) SR |
22(7/8) |
|
38 |
|
4877, 6707,7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
35(1 3/8)PR |
一 |
25(1) |
38 |
|
4877, 6707,7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
40(1 9/16)SR |
29(1 1/8) |
Mechanical Property OF Stainless steel polished rod:
Mechanical Property OF Steel Polished Rod |
|||||||||||
GRADE |
Minimum Yield Strength(0.2% Residual Deformation) |
Minimum Tensile Strength |
Maxmum Tensile Strength |
Elongation200mm% |
Reduction of Area Z% |
HRC |
HB |
Fatigue Life |
|||
psi |
MPa |
psi |
MPa |
psi |
MPa |
≥13 |
≥50 |
≥1.0X106 |
|||
C |
60000 |
414 |
90000 |
621 |
115000 |
793 |
≥13 |
≥50 |
|||
D |
85000 |
586 |
115000 |
793 |
140000 |
965 |
≥13 |
≥50 |
|||
KD |
85000 |
590 |
115000 |
795 |
140000 |
965 |
≥13 |
≥50 |
|||
H |
115000 |
795 |
140000 |
965 |
173339 |
1195 |
≥13 |
≥45 |
|||
EHL |
/ |
/ |
188500 |
1300 |
217500 |
1500 |
/ |
/ |
≥50 |
≥320 |
≥2.5X106 |
Note: When the minimum yield strength cannot be measured, it should be considered to be processed into standard sample and install extensometer to measure. |
|||||||||||
a It is generally made of high quality carbon steel, which can reach the mechanical properties of the table b A molybdenum steel (but not limited to this type of steel) is generally used, and the effective heat treatment can achieve the mechanical properties of this table |
Chemical Composition OF Commonly Used Sucker Rod:
Chemical Composition OF Commonly Used Sucker Rod |
|||||||||||
AISI |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
V |
Cu |
Al |
4130 |
≤0.025 |
≤0.025 |
≤0.3 |
/ |
≤0.2 |
/ |
|||||
4140 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
4142 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
4330 |
≤0.025 |
≤0.025 |
≤0.2 |
/ |
|||||||
4720 |
≤0.025 |
≤0.025 |
在线联系供应商
Other supplier products
Grade D Sucker Rod | Grade D Sucker Rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from China leading manufacturer. Our products are ef... | |
Sucker Rod | Grade HY Sucker Rod Grade HY Sucker Rod Description If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the prof... | |
main rib drill pipe | How to maintain the phenomenon of wear of the main rib drill pipe? Shared by. In ultra-deep Wells, high-slant Wells, long-displacement Wells and h... | |
Grade HY Sucker Rod On Sale With Good Price | Grade HY Sucker RodOn Sale With Good Price Grade HY Sucker Rod DescriptionGrade HY Sucker Rodwith factory price If you have any question on Grade ... | |
high tensile strength | If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the professional answers to your short questions. Grade HY S... |
Same products
KLUBER LECTRIC KR 44-102 1KG Grease | 卖方: 广东聚广恒自动化设备有限公司 | “LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7... | |
KLUBER ISOFLEX TOPAS NCA52 75G Grease | 卖方: 广东聚广恒自动化设备有限公司 | 1 Three Bond 2706 Oil &Grease Removing Agent 420ML/PC10PC/Carton 2... | |
Kluber ISOFLEX TOPAS L 32CN 1KG Grease for Pick and Place Machine | 卖方: 广东聚广恒自动化设备有限公司 | “LUBE FS-2-7 700G” LUBE FS-2-4 400G LUBE FS-2-2 200G LUBE FS-1-7 700G LUBE MY-2-7... | |
BQH 72-102 grease 1KG for Pick and Place Machine | 卖方: 广东聚广恒自动化设备有限公司 | NSK LR380G/PC 20PC,50PC/Carton NSK AS280G/PC 20PC,50PC/Carton NSK LG280G/PC 20PC,50PC/Carton N... | |
LDS 18 1kg kluber Lubricants for SMT Machine | 卖方: 广东聚广恒自动化设备有限公司 | NSK Ns7 K3035K Grease for FUJI Nxt Machine NSK Lr3 Bearing Grease K48-M3851-10X NSK LG2 Grease ... |