Hexagonal Kelly
Kelly is located in the top of the drill string, with square and hexagonal.In rotary drilling, when it is drilling, kelly connected with square bushing and rotary bushing, transferthe ground rotary torque to Heavy Weight Drill Pipeand to drive the drill bit,bearingthe weight of the drill string.In the drilling of the turbine and screw, the weight of the drill string and the counter torque are supported.
We are a square Kelly manufacturerin China, our company has 2 sucker rod workshops, 3 production lines. We guarantee on-time delivery, No middleman!
Square Kelly Specification:
|
Specification |
Drive part length |
Overall length |
Drive part |
Upper internal threaded joint |
Lower external threaded joint |
Inner diameter |
|||||||||||||||||
|
StandardLD |
SelectionLD |
Standard |
Selection |
Square sizeDFL |
Across cornerDC |
Across cornerDCC |
RadiusRC |
RadiusRCC |
Eccentric hole minimum wall thickness |
Screw thread specification and left rotate type |
Outside diameter |
Chamfering diameter |
Thread specification and type |
Outside diameterDLR |
LengthLL |
Chamfering diameterDF |
|||||||
|
Standard |
Selection |
Standard |
Selection DU |
length LU |
Standard DF |
Selection DF |
|||||||||||||||||
|
（2½） |
11280 |
12190 |
（65/8）REG |
(4½)REG |
NC26(23/8IF) |
508 |
|||||||||||||||||
|
3 |
11280 |
12190 |
100 |
（65/8）REG |
(4½)REG |
NC31(27/8IF) |
508 |
||||||||||||||||
|
（3½） |
11280 |
12190 |
（65/8）REG |
(4½)REG |
NC38(3½IF) |
508 |
|||||||||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
108 |
（65/8）REG |
(4½)REG |
NC46(4IF) |
508 |
|||||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
108 |
（65/8）REG |
(4½)REG |
NC50(4½IF) |
508 |
154 |
||||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
（65/8）REG |
5½FH |
508 |
||||||||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
（65/8）REG |
NC56 |
508 |
||||||||||||||||
Hexagonal Kelly Specification mm（in):
|
Specification |
Drive part lengthти длины |
Overall length |
Drive part |
Upper internal threaded joint |
Lower external threaded joint |
Inner diameter |
|||||||||||||||||
|
StandardLD |
SelectionLD |
Standard |
Selection |
Square sizeDFL |
Across cornerDC |
Across cornerDCC |
RadiusRC |
RadiusRCC |
Eccentric hole minimum wall thickness |
Screw thread specification and left rotate type |
Outside diameter |
Chamfering diameter |
Thread specification and type |
Outside diameterDLR |
LengthLL |
Chamfering diameterDF |
|||||||
|
Standard |
Selection |
Standard DC |
Selection DU |
length LU |
Standard DF |
Selection DF |
|||||||||||||||||
|
（2½） |
11280 |
12190 |
（65/8）REG |
(4½)REG |
NC26(23/8IF) |
508 |
|||||||||||||||||
|
3 |
11280 |
12190 |
100 |
50 |
（65/8）REG |
(4½)REG |
NC31(27/8IF) |
508 |
|||||||||||||||
|
（3½） |
11280 |
15540 |
12190 |
16460 |
108 |
（65/8）REG |
(4½)REG |
NC38(3½IF) |
508 |
||||||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
75 |
（65/8）REG |
- |
- |
- |
NC46(4IF) |
508 |
|||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
75 |
（65/8）REG |
- |
- |
- |
NC50(4½IF) |
508 |
154 |
||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
173 |
（65/8）REG |
- |
- |
- |
5½FH |
508 |
||||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
173 |
（65/8）REG |
- |
- |
- |
NC56 |
508 |
||||||||||||
|
Steel Mark |
Chemical Composition% |
||||||||
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Cu |
Al |
|
|
4145H |
|
≤0.03 |
≤0.03 |
|
≤0.2 |
|
|||
|
Other Elements：N≤0.015，Ni≤0.5 |
|||||||||
Mechanical Property:
|
Mechanical Property |
||||||||
|
Outside Diameter Range |
Yield Strength |
Tensile Strength |
ElongationA% |
HB |
Charpy impactAkv J |
|||
|
mm |
in |
MPa |
Psi |
MPa |
Psi |
|||
|
3-1/8～6-3/4 |
≥758 |
≥110000 |
≥965 |
≥140000 |
≥13 |
285～341 |
≥54 |
|
7 |
≥689 |
≥100000 |
≥930 |
≥135000 |
≥13 |
285～341 |
≥54 |
|
|
Under special conditions, the impact work of the charpy can be determined as greater than 70J according to the supply and demand |
||||||||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Grade HY Sucker Rod for Oil Drilling | Grade HY Sucker RodOn Sale With Good Price Grade HY Sucker Rod DescriptionGrade HY Sucker Rodwith factory price If you have any question on Grade ... |
 |
API grade d sucker rod | Grade D Sucker Rodwith chinese manufactuer API grade d sucker rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from C... |
 |
Grade D Sucker Rod | Grade D Sucker Rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from China leading manufacturer. Our products are eff... |
 |
Api Solid Sucker Rods | If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the professional answers to your short questions. Grade HY S... |
 |
Spray Anti-corrosion Sucker Rod | Spray Anti-corrosion Sucker Rod It is a kind of manufacturability anti-corrosion sucker rod, the rod surface spraying a layer of special anti-corro... |
Похожие товары
 |
3-IN-ONE 100703 118ml Lubricates, cleans & Prevents Rust | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | This effective formula penetrates rust to loosen stuck hinges, nuts, bolts, wheels, fans, tools, ... |
 |
LUBCON Thermoplex ALN 1001/00 50ml Oil Original New | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Modèle:THERMOPLEX ALN 1001/00 Température: -40°C à 140°C ; Entreteni... |
 |
Kluberoil Lamora D 220 30ml Original Oil | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | LAMORA Doils are used for the lubrication of slideways and guideways in modern machining centres,... |
 |
LUBE SH-ONE-4S 400G for Fanuc Machines | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | TheLUBE SH-ONE-4Sis a special ureagreasedesigned for appropriatelubricationmanagement of machine ... |
 |
Mobil Grease 28 Synthetic Aviation Grease | Продавец: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobilgrease 28resists water washing, provides superior load-carrying ability, reduces frictional ... |
