Hexagonal Kelly
Kelly is located in the top of the drill string, with square and hexagonal.In rotary drilling, when it is drilling, kelly connected with square bushing and rotary bushing, transferthe ground rotary torque to Heavy Weight Drill Pipeand to drive the drill bit,bearingthe weight of the drill string.In the drilling of the turbine and screw, the weight of the drill string and the counter torque are supported.
We are a square Kelly manufacturerin China, our company has 2 sucker rod workshops, 3 production lines. We guarantee on-time delivery, No middleman!
Square Kelly Specification:
|
Specification |
Drive part length |
Overall length |
Drive part |
Upper internal threaded joint |
Lower external threaded joint |
Inner diameter |
|||||||||||||||||
|
StandardLD |
SelectionLD |
Standard |
Selection |
Square sizeDFL |
Across cornerDC |
Across cornerDCC |
RadiusRC |
RadiusRCC |
Eccentric hole minimum wall thickness |
Screw thread specification and left rotate type |
Outside diameter |
Chamfering diameter |
Thread specification and type |
Outside diameterDLR |
LengthLL |
Chamfering diameterDF |
|||||||
|
Standard |
Selection |
Standard |
Selection DU |
length LU |
Standard DF |
Selection DF |
|||||||||||||||||
|
（2½） |
11280 |
12190 |
（65/8）REG |
(4½)REG |
NC26(23/8IF) |
508 |
|||||||||||||||||
|
3 |
11280 |
12190 |
100 |
（65/8）REG |
(4½)REG |
NC31(27/8IF) |
508 |
||||||||||||||||
|
（3½） |
11280 |
12190 |
（65/8）REG |
(4½)REG |
NC38(3½IF) |
508 |
|||||||||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
108 |
（65/8）REG |
(4½)REG |
NC46(4IF) |
508 |
|||||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
108 |
（65/8）REG |
(4½)REG |
NC50(4½IF) |
508 |
154 |
||||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
（65/8）REG |
5½FH |
508 |
||||||||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
（65/8）REG |
NC56 |
508 |
||||||||||||||||
Hexagonal Kelly Specification mm（in):
|
Specification |
Drive part lengthти длины |
Overall length |
Drive part |
Upper internal threaded joint |
Lower external threaded joint |
Inner diameter |
|||||||||||||||||
|
StandardLD |
SelectionLD |
Standard |
Selection |
Square sizeDFL |
Across cornerDC |
Across cornerDCC |
RadiusRC |
RadiusRCC |
Eccentric hole minimum wall thickness |
Screw thread specification and left rotate type |
Outside diameter |
Chamfering diameter |
Thread specification and type |
Outside diameterDLR |
LengthLL |
Chamfering diameterDF |
|||||||
|
Standard |
Selection |
Standard DC |
Selection DU |
length LU |
Standard DF |
Selection DF |
|||||||||||||||||
|
（2½） |
11280 |
12190 |
（65/8）REG |
(4½)REG |
NC26(23/8IF) |
508 |
|||||||||||||||||
|
3 |
11280 |
12190 |
100 |
50 |
（65/8）REG |
(4½)REG |
NC31(27/8IF) |
508 |
|||||||||||||||
|
（3½） |
11280 |
15540 |
12190 |
16460 |
108 |
（65/8）REG |
(4½)REG |
NC38(3½IF) |
508 |
||||||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
75 |
（65/8）REG |
- |
- |
- |
NC46(4IF) |
508 |
|||||||||||
|
108 |
（4¼） |
11280 |
15540 |
12190 |
16460 |
75 |
（65/8）REG |
- |
- |
- |
NC50(4½IF) |
508 |
154 |
||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
173 |
（65/8）REG |
- |
- |
- |
5½FH |
508 |
||||||||||||
|
（5¼） |
11280 |
15540 |
12190 |
16460 |
173 |
（65/8）REG |
- |
- |
- |
NC56 |
508 |
||||||||||||
|
Steel Mark |
Chemical Composition% |
||||||||
|
C |
Si |
Mn |
P |
S |
Cr |
Mo |
Cu |
Al |
|
|
4145H |
|
≤0.03 |
≤0.03 |
|
≤0.2 |
|
|||
|
Other Elements：N≤0.015，Ni≤0.5 |
|||||||||
Mechanical Property:
|
Mechanical Property |
||||||||
|
Outside Diameter Range |
Yield Strength |
Tensile Strength |
ElongationA% |
HB |
Charpy impactAkv J |
|||
|
mm |
in |
MPa |
Psi |
MPa |
Psi |
|||
|
3-1/8～6-3/4 |
≥758 |
≥110000 |
≥965 |
≥140000 |
≥13 |
285～341 |
≥54 |
|
7 |
≥689 |
≥100000 |
≥930 |
≥135000 |
≥13 |
285～341 |
≥54 |
|
|
Under special conditions, the impact work of the charpy can be determined as greater than 70J according to the supply and demand |
||||||||
在线联系供应商
Other supplier products
 |
Stainless steel polished rod | Spray Polished Rod Function of Polish Rod Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top o... |
 |
main rib drill pipe | How to maintain the phenomenon of wear of the main rib drill pipe? Shared by. In ultra-deep Wells, high-slant Wells, long-displacement Wells and h... |
 |
Sucker rod for sal | shares that in oil drilling, a drill tool is used to break up rock and drill into the ground to drill holes of specified depth for oil or gas produ... |
|
|
Hexagonal Kelly | Kelly is located in the top of the drill string, with square and hexagonal.In rotary drilling, when it is drilling, kelly connected with square bus... |
 |
API grade d sucker rod | Grade D Sucker Rodwith chinese manufactuer API grade d sucker rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from C... |
