Stainless steel polished rod
Spray Polished Rod
Function of Polish Rod
Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top of sucker rod,need to bear the most strength,sowith bigger diameter and highersteel gradethan sucker rod,and the surfaceis very smooth.
We also provide:API AISI 4140 Polished Rod,3/4" Polished Rod.
Main function:
Combined with packing set in packing box to seal wellhead and prevent oil、gas、water disclosure.
Interim connector between sucker rod and mule head hanger.
Finishing indicator diagram test.
Complete various wellhead operation,such as pump striking,regulating pump setting.
CHEMICAL COMPOSITION
Sucker rod manufacturer:Found Petroleum Equipment
Type specification table:
|
Nominal value |
Rod body diameter D+0.127-0.254（+0.005-0.010）mm（in) |
Length Lmm士 50mm （Lft 士 2in) |
Thread nominal diameter mm（in） |
mm (in） Outer thread shoulder outer diameter |
Suitable sucker rod size mm (in) |
|
29 |
|
2438, 3353, 4877, 6707, 7315, 7925(8, 11. 16. 22. 24 , 26) |
24 （15/16） PR |
一 |
16 (5/8) |
|
27 （1 1/16） PR |
一 |
19 (3/4) |
|||
|
29 |
|
2438, 3353, 4877, 6707 , 7315, 7925 (8. 11, 16. 22 , 24 , 26) |
24 (15/16 ) SR |
16 (5/8) |
|
|
27 (1 1/16 ) SR |
19 (3/4) |
||||
|
32 |
|
3353, 4877， ,6707，7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) PR |
一 |
22(7/8) |
|
32 |
|
3353, 4877， ,6707，7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) SR |
22(7/8) |
|
|
38 |
|
4877, 6707，7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
35（1 3/8）PR |
一 |
25(1) |
|
38 |
|
4877, 6707，7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
40（1 9/16）SR |
29(1 1/8) |
Mechanical Property OF Stainless steel polished rod:
|
Mechanical Property OF Steel Polished Rod |
|||||||||||
|
GRADE |
Minimum Yield Strength(0.2% Residual Deformation） |
Minimum Tensile Strength |
Maxmum Tensile Strength |
Elongation200mm% |
Reduction of Area Z% |
HRC |
HB |
Fatigue Life |
|||
|
psi |
MPa |
psi |
MPa |
psi |
MPa |
≥13 |
≥50 |
≥1.0X106 |
|||
|
C |
60000 |
414 |
90000 |
621 |
115000 |
793 |
≥13 |
≥50 |
|||
|
D |
85000 |
586 |
115000 |
793 |
140000 |
965 |
≥13 |
≥50 |
|||
|
KD |
85000 |
590 |
115000 |
795 |
140000 |
965 |
≥13 |
≥50 |
|||
|
H |
115000 |
795 |
140000 |
965 |
173339 |
1195 |
≥13 |
≥45 |
|||
|
EHL |
/ |
/ |
188500 |
1300 |
217500 |
1500 |
/ |
/ |
≥50 |
≥320 |
≥2.5X106 |
|
Note: When the minimum yield strength cannot be measured, it should be considered to be processed into standard sample and install extensometer to measure. |
|||||||||||
|
a It is generally made of high quality carbon steel, which can reach the mechanical properties of the table b A molybdenum steel (but not limited to this type of steel) is generally used, and the effective heat treatment can achieve the mechanical properties of this table |
|||||||||||
Chemical Composition OF Commonly Used Sucker Rod:
|
Chemical Composition OF Commonly Used Sucker Rod |
|||||||||||
|
AISI |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
V |
Cu |
Al |
|
4130 |
≤0.025 |
≤0.025 |
≤0.3 |
/ |
≤0.2 |
/ |
|||||
|
4140 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
|
4142 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
|
4330 |
≤0.025 |
≤0.025 |
≤0.2 |
/ |
|||||||
|
4720 |
≤0.025 |
≤0.025 |
|||||||||
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Sucker Rod Centralizer | Sucker rod centralizeris a kind of downhole toolswhichis pumping wellanti-abrasion, it is especially suitable for pumping well and directionalwell ... |
 |
Grade HY Sucker Rod | Grade HY Sucker Rod Grade HY Sucker Rod Description If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the pr... |
 |
high strength sucker rod for sale | for sale Oil drilling engineering shares that using oil drilling equipment from the ground along the orbit design drill wear many strata in purpose... |
 |
main rib drill pipe | How to maintain the phenomenon of wear of the main rib drill pipe? Shared by. In ultra-deep Wells, high-slant Wells, long-displacement Wells and h... |
 |
drill pipe of rotary excavator | drill pipe of rotary excavator Correct cleaning method for drill pipe of rotary excavator shared by. When cleaning the drill pipe of rotary excavat... |
Похожие товары
 |
Core Drill Bits For Stone | Продавец: Hebei XMF Tools Group Co., Ltd | Our Core Drill Bits for Stoneare designed for professional cutting and drilling of granite, marbl... |
 |
Molykote M-77 Anti-Seize Paste Lubricant to Prevent Galling During Running-In 2KG/Can | Продавец: Dongguan Fuxiaojing New Materials Technology Co., Ltd | Please contact Nancy if you are interested any time. Phone / |
 |
Shell gadus S2 V220 2 450G for Heavy duty bearings and general industrial lubrication | Продавец: Dongguan Fuxiaojing New Materials Technology Co., Ltd | Outstanding Load Carrying Capacity Improved Mechanical Stability Good Resistance to Water Wash-ou... |
 |
Kluber Summit SH 46 air compressor oils for Rotary Screw, Centrifugal 20L | Продавец: Dongguan Fuxiaojing New Materials Technology Co., Ltd | |
 |
Kluberlectric KR 44-402 for the Lubrication of Electrical Switches 1KG | Продавец: Dongguan Fuxiaojing New Materials Technology Co., Ltd | Please contact Nancy if you are interested any time. Phone / Website: |
