Stainless steel polished rod
Spray Polished Rod
Function of Polish Rod
Polish rodis a kind of special sucker rod connected with sucker rod and beam hanger. It is at the top of sucker rod,need to bear the most strength,sowith bigger diameter and highersteel gradethan sucker rod,and the surfaceis very smooth.
We also provide:API AISI 4140 Polished Rod,3/4" Polished Rod.
Main function:
Combined with packing set in packing box to seal wellhead and prevent oil、gas、water disclosure.
Interim connector between sucker rod and mule head hanger.
Finishing indicator diagram test.
Complete various wellhead operation,such as pump striking,regulating pump setting.
CHEMICAL COMPOSITION
Sucker rod manufacturer:Found Petroleum Equipment
Type specification table:
|
Nominal value |
Rod body diameter D+0.127-0.254（+0.005-0.010）mm（in) |
Length Lmm士 50mm （Lft 士 2in) |
Thread nominal diameter mm（in） |
mm (in） Outer thread shoulder outer diameter |
Suitable sucker rod size mm (in) |
|
29 |
|
2438, 3353, 4877, 6707, 7315, 7925(8, 11. 16. 22. 24 , 26) |
24 （15/16） PR |
一 |
16 (5/8) |
|
27 （1 1/16） PR |
一 |
19 (3/4) |
|||
|
29 |
|
2438, 3353, 4877, 6707 , 7315, 7925 (8. 11, 16. 22 , 24 , 26) |
24 (15/16 ) SR |
16 (5/8) |
|
|
27 (1 1/16 ) SR |
19 (3/4) |
||||
|
32 |
|
3353, 4877， ,6707，7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) PR |
一 |
22(7/8) |
|
32 |
|
3353, 4877， ,6707，7315, 7925 , 9144, 10973(11, 16, 22 . 24. 26, 30. 36) |
30 (1 3/16 ) SR |
22(7/8) |
|
|
38 |
|
4877, 6707，7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
35（1 3/8）PR |
一 |
25(1) |
|
38 |
|
4877, 6707，7315, 7925. 9144. 10973(16, 22. 24, 26, 30. 36) |
40（1 9/16）SR |
29(1 1/8) |
Mechanical Property OF Stainless steel polished rod:
|
Mechanical Property OF Steel Polished Rod |
|||||||||||
|
GRADE |
Minimum Yield Strength(0.2% Residual Deformation） |
Minimum Tensile Strength |
Maxmum Tensile Strength |
Elongation200mm% |
Reduction of Area Z% |
HRC |
HB |
Fatigue Life |
|||
|
psi |
MPa |
psi |
MPa |
psi |
MPa |
≥13 |
≥50 |
≥1.0X106 |
|||
|
C |
60000 |
414 |
90000 |
621 |
115000 |
793 |
≥13 |
≥50 |
|||
|
D |
85000 |
586 |
115000 |
793 |
140000 |
965 |
≥13 |
≥50 |
|||
|
KD |
85000 |
590 |
115000 |
795 |
140000 |
965 |
≥13 |
≥50 |
|||
|
H |
115000 |
795 |
140000 |
965 |
173339 |
1195 |
≥13 |
≥45 |
|||
|
EHL |
/ |
/ |
188500 |
1300 |
217500 |
1500 |
/ |
/ |
≥50 |
≥320 |
≥2.5X106 |
|
Note: When the minimum yield strength cannot be measured, it should be considered to be processed into standard sample and install extensometer to measure. |
|||||||||||
|
a It is generally made of high quality carbon steel, which can reach the mechanical properties of the table b A molybdenum steel (but not limited to this type of steel) is generally used, and the effective heat treatment can achieve the mechanical properties of this table |
|||||||||||
Chemical Composition OF Commonly Used Sucker Rod:
|
Chemical Composition OF Commonly Used Sucker Rod |
|||||||||||
|
AISI |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
V |
Cu |
Al |
|
4130 |
≤0.025 |
≤0.025 |
≤0.3 |
/ |
≤0.2 |
/ |
|||||
|
4140 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
|
4142 |
≤0.025 |
≤0.025 |
≤0.3 |
≤0.2 |
/ |
||||||
|
4330 |
≤0.025 |
≤0.025 |
≤0.2 |
/ |
|||||||
|
4720 |
≤0.025 |
≤0.025 |
|||||||||
Send product request
Other supplier products
 |
Grade HY Sucker Rod for Oil Drilling | Grade HY Sucker RodOn Sale With Good Price Grade HY Sucker Rod DescriptionGrade HY Sucker Rodwith factory price If you have any question on Grade ... |
 |
Grade D Sucker Rod Φ16（5/8"） | Grade D Sucker Rod Hot sale various high quality Grade D Sucker Rod and 1" Grade D sucker rod from China leading manufacturer. Our products are eff... |
 |
oilfield drill pipe | oilfield drill pipe Drill pipe plays a decisive role in the process of drilling, it transfered the drilling torque to drill bit, inordertodrilling... |
 |
high torsion strength Sucker Rod | If you have any question on Grade Hy Sucker Rodand Api Solid Sucker Rods. We will give the professional answers to your short questions. Grade HY S... |
 |
Heavy duty sucker rod | Heavy duty sucker rod shares that the weight bar provides a stable center of gravity for the bar above the pump, keeping it vertical and firm to re... |
Same products
 |
3-IN-ONE 100703 118ml Lubricates, cleans & Prevents Rust | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | The new3-in-One® multi-purpose oil with telescoping marksman spout comes in handy when precis... |
 |
LUBCON Thermoplex ALN 1001/00 50ml Oil Original New | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Lubcon THERMOPLEX ALN 1001/00is a synthetic semi-fluid gear grease can be used on ASM Siemens mac... |
 |
Kluberoil Lamora D 220 30ml Original Oil | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Our oils offer excellent lubricity also at low sliding speeds, enabling constant and precise feed... |
 |
LUBE SH-ONE-4S 400G for Fanuc Machines | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Lubecorp part number 249250 is a 400ml bellows style cartridge often times used in autolube appli... |
 |
Mobil Grease 28 Synthetic Aviation Grease | Seller: Guangdong Juguangheng Automation Equipment Co.,Ltd. | Mobil grease 28is a high performance, antiwear grease. Available as a cartridge,2kgcan, 16kg pail... |
