Conformal Coating
Conformal coating is a thin transparent polymeric coating applied to PCB’s to provide protection from the end-use environment. Common types of conformal coatings include acrylics, urethanes, epoxies, silicones and polyparaxylylene. They are typically applied at 1-5 mil thickness. Conformal coatings have many common functions, such as inhibiting current leakage due to environmental contamination, inhibiting corrosion, improving fatigue resistance of solder joints, inhibiting arcing and corona, providing mechanical support. Meanwhile GOLOHO conformal coating products can meet the critical demands with the reduction in component size, pitch, circuitry spacing, and laminate thickness.
The PCB products with conformal coating are reliability that is the ability to function under specific conditions for a specified period of time without failure. GOLOHO conformal coating products are used in different fields including aerospace, military, automotive, electronics industry.
The kinds of GOLOHO conformal coating products are solvent-based and solvent-free, which can be cured at room temperature or heat and UV. They meet different conformal coating application techniquessuch as brushing, dipping, selective flood coating, needle dispensing, manual spray, automated selective coating. The methods of application have different advantages and disadvantages. The advantages of brushing are low capital investment, no masking required and good for rework, while disadvantages are inconsistent thickness, difficult to control voids and bubbles, and very dependent on operator technique. The advantages of dipping are low volume throughput, coverage on complex shapes, while disadvantages are impacted by ambient conditions (temperature and humidity) and must be kept free of contamination. The advantages of manual spray are low capital investment, simple process and can coat complicated board designs, while disadvantages are hard to contain overspray, difficult to control coating thickness and required multiple cure.
GOLOHO conformal coating products own very good resistance against moisture and condensation, thus enabling an excellent corrosion protection for assembled PCBs (e.g. e-corrosion and migration), typical dry layer thickness < 80 µm, suitable for coating flexible circuits ("flex-to-install"); can be soldered through for repair or mechanically removed (blasting method); colored-transparent, opaque or fluorescent adjustments permit a simple checking of the coating layer for completeness with daylight or UV light (black light).
GOLOHO POLYMER was founded in China, setting up factory to develop and produce rtv grease.Now the company embraces united and dynamic team, experienced R&D center, advanced detection method, strong manufacture capacity as well as customer-oriented service. We sincerely invite and welcome people from all around the world to invest and create more values together.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
 |
Thermally Conductive Silicone Adhesive - 2752 | Thermally Conductive Silicone Adhesive - 2752 FEATURES OFGOLOHO-2752 GOLOHO-2741 is a high performancertv greasesilicone thermally conductive adhes... |
 |
Thermally Conductive Silicone Adhesive - 2752 | Are you looking for RTV silicone thermal conductivity? FEATURES OF GOLOHO-2752 GOLOHO-2741 is a high performance thermally conductive RTV silicone ... |
 |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a heat cure silicone adhesivessilicone glue ·Convenient to use: one... |
 |
Light/Moisture Cure Conformal Coating-L213 | FEATURES OF GOLOHO-L213 UV rapid cure secondary moisture cure one-component, 100% solid content low viscosity -55℃~120℃ temperature resistance: -55... |
Похожие товары
 |
Automotive & Marine Adhesive Sealant | Продавец: Ordovician Mind (Zhengzhou) Technology Co., Ltd. | Automotive & Marine Adhesive Sealant is designed for demanding bonding and sealing appli... |
 |
MS waterproof coating sealant | Продавец: Ordovician Mind (Zhengzhou) Technology Co., Ltd. | MS waterproof coating sealant MS Waterproof Coating Sealant GluePro is designed for liquid-... |
 |
MS Polymer Sealant For Window and Door | Продавец: Ordovician Mind (Zhengzhou) Technology Co., Ltd. | MS Polymer Sealant For Window and Door GluePro is designed for professional home decoration,... |
 |
ODM-606 Water-Based Intumescent Firestop Sealant | Продавец: Ordovician Mind (Zhengzhou) Technology Co., Ltd. | ODM-606 Water-Based Intumescent Firestop Sealant ODM-606 WATERBORNE FIRESTOP SEALANT is an ... |
 |
electronic potting compound supplier | Продавец: Ordovician Mind (Zhengzhou) Technology Co., Ltd. | electronic potting compound supplier Ordovician Mind manufactures a comprehensive range of E... |
