Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB
Two-Part, 1 To 1 Mix Ratio Transparenttwo part silicone gel- 324C-AB
SPECIAL FEATURESOF GOLOHO-324C-AB
1:1Two-part, 1:1 mix ratioLow viscosityRoom temperature accelerated cure, no small molecule releaseSuitable working time at room temperatureExcellent adhesion and self-healingExcellent stability at 200℃ high temperature.rtv grease
- Description
GOLOHO-324C is a two-part, addition curing silicone gel
APPLICATIONS OF GOLOHO-324C-AB
Suitable for sealing and protecting various high purity electronic devicesEspecially protection of sophisticated and mixed circuit
TECHNICAL DATA OF GOLOHO-324C-AB(THESE VALUES ARE NOT THE ULTIMATE PROPERTY PERFORMANCE, FOR REFERENCE ONLY)
Model |
GOLOHO-324C-AB |
|
Uncured |
||
Appearance |
A |
Colorless transparent |
B |
Colorless transparent |
|
Specific gravity |
A (25℃)g/cm3 |
0.96~0.99 |
B (25℃)g/cm3 |
0.96~0.99 |
|
Viscosity |
A (25℃)cps |
400~600 |
B (25℃)cps |
400~600 |
|
A/BMix ratio ratio(weight) |
1:1 |
|
cPMixed viscosity |
450~550 |
|
(25℃,60%RH)minWorking time |
60 |
|
Cured |
||
Cure time at 25℃ |
6 |
|
Heat cure time at 60℃ |
30 |
|
Heat cure time at 130℃ |
10 |
|
Hardness |
15 |
|
Penetration |
20mm/10s |
|
Linear CTE(by TMA) |
350ppm/℃ |
|
Volume resistivity |
5×1015 |
|
Dielectric strength |
21 |
CAUTIONS OF GOLOHO-324C-AB
- To ensure all the protected surfaces be clean and dry
- The two components should be thoroughly mixed at a 1:1 ratio by weight or volume, a vacuum encapsulation for 5~10min is recommended(10~20mm Hg)
- Working time is defined as the time required for viscosity to double after mixing followed by recommended ratio in 2h at room temperature
- To eliminate any air introduced during dispensing or trapped, a vacuum encapsulation is recommended, especially for complex shape circuit
SPECIAL NOTES OF GOLOHO-324C-AB
Don't contact with the following materials specially in the process of using, otherwise it will cure incompletely or even not cure.
- Organotin
- Organic silicone with tin
- Sulfides
- Amide, polyurethane, amide, azido components
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | Two-Part, 1 To 1 Mix Ratio Transparenttwo part silicone gel- 324C-AB SPECIAL FEATURESOF GOLOHO-324C-AB 1:1Two-part, 1:1 mix ratioLow viscosityRoom ... | |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a high-performance heat vulcanized silicone glue ·Convenient to us... | |
High Performance Silicone Adhesive/Sealant - 2402W | FEATURES OF HEAT RESISTANT RTV SILICONE GLUE GOLOHO-2402W GOLOHO-2491 is a heat cure silicone adhesivessilicone glue ·Convenient to use: one... | |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... | |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | SPECIAL FEATURES OF GOLOHO-324C-AB 1:1 Two-part, 1:1 mix ratio Low viscosity Room temperature accelerated cure, no small molecule release Suitable ... |
Похожие товары
OSi PEMS 57 CAS 70914-12-4 | Продавец: OSi Holding Limited | Other descriptions: Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyethylene... | |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Продавец: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... | |
LA-17 Polyether Modified Short Chain Polysiloxane | Продавец: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... | |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Продавец: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... | |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Продавец: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |