.

Fiber Optic Switch

The fiber optical switchAGS14 is a non-mechanical designed fiber optic device based on the Faraday effect with Bi-refringent crystal and micro-optical components. Without moving parts in the design, the switch can meet the high requirement on reliability, durability and high switching speed.

Features Of Fiber Optic Switcher

High Speed

Non-Mechanical

High Stability & Reliability

Application Of Fiber Optic Switcher

Fiber Optical Sensing

Switching

Latching

Signal Monitoring

Specification Of Fiber Optic Switcher

1x4

Min

Typical

Max

Unit

Operation Wavelength

1500

1550

1600

nm

Insertion Loss

dB

PDL

dB

ER(PM version)

18

dB

Cross Talk

32

50

32

dB

PMD

ps

Return Loss

50

dB

Durability

1011

cycle

Operating Temperature

-5

70

Optical Power

500

mW

Storage Temperature

-40

85

Switch Type

Latching

Fiber Type

SMF28 / PM1550

Switch Time

ms

Power Input

DC 12V

Dimension

152mm*142mm*50mm

Serial (RS-232) Interface

Electrical characteristics: Conforms to the EIA-574 standard (EIA-232 (RS-232), 9-pin) Baud rate: 2400, 9600, 57600, 115200, 230400

Start bit: 1 bit, fixed Data length: 8 bit, fixed

Parity: Odd, Even, or None Stop bit: 1 bit(default)

Connector: DELC-J9PAF-13L6 (JAE or equivalent) Flow control: None

UART bit formats are listed in the following table:

Parity

UART frame

None

| Start bit | 8-bit data | Stop bit |

Odd/Even

| Start bit | 8-bit data | Parity bit | Stop bit |

Ethernet Interface

Electromechanical specifications: Conforms to IEEE802.3 Transmission method: 10BaseT/100BaseTX Ethernet Communication protocol: TCP/IP

Connector type: RJ45

Port number used: 8080 (fixed)

Configure Network Information

Visit the website , 192.168.1.100 is a device IP address. The default network information is on the nameplate attached to the device.

Fiber Optic Switcher

Note: Visit configuration website will increase the switch time when the AGS14 is working at switch mode.

The Ethernet port just supports static IP mode, please avoid conflict with other network devices in the same subnet. If the device has been set to the wrong IP and can`t be accessed any more,push the Restore Button for 6 seconds to restore the default settings. When push down the Restore Button, the LED will twinkle until restore succeed.

Data Frame Formats About TCP/UART

A complete frame contains 2 bytes: fixed start byte and command byte. Start byte Command byte

0xF0(Fixed) 1-byte data

Once the client transmits the command, it needs to wait for the device to reply.

Function

Transmit frame (hexadecimal)

Reply frame (hexadecimal)

Say hello, use for test connection, the device will do nothing

0xF000

0xF000

Switch to channel 1

0xF001

0xF001

Switch to channel 2

0xF002

0xF002

Switch to channel 3

0xF003

0xF003

Switch to channel 4

0xF004

0xF004

AtGrating is a professional supplier forfiber optic sensing. AtGrating offers industrial solutions by providing customized sensors and sensing instruments that add value, reduce uncertainty, and maximize performance from our customer systems.

We also have sorts of fiber optic pressure sensorfor sale, if you have needs, please leave us a message.



Отправить запрос, связаться с поставщиком

Кому: AtGrating Technologies
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

FBG Strain Sensor MST-01
FBG Strain Sensor MST-01 Surface mounted FBG temperature compensation strain sensor MST-01 is mainly used for optical strainmeasurement on the surface of various structures...
Tight Buffer FBG Array
Tight Buffer FBG Array FBG is a core element used as a sensor for structure health monitoring. The tight buffer FBG array consists of FBG array sensors. The outer layer c...
Distributed Temperature Sensing (DTS)
Distributed Temperature Sensing (DTS) Raman based distributed temperature sensing systems utilize spontaneous Raman scattering generated by the interaction between light (photons) and m...
Armored FBG Sensing Cable
Armored FBG Sensing Cable Armored Fiber Optic Sensing Cable The armored fiber opticcable is a cable with ultra-sensitivity used for quick and easy strain monitoring in se...
FBG Array & Cable
FBG Array & Cable For different applications, there are multi-points monitoring requirements, we offer all kinds of packaged fbg sensor arraywhich different waveleng...
Все товары поставщика

Похожие товары

2D Matrix Fiber Array
2D Matrix Fiber Array Продавец: Zhongshan Meisu Technolody Co.,Ltd Two-dimensional M * N fiber array is a kind of fiber component that has many fibers arranged orde...
Endoscope Cable for STORZ H3-Z
Endoscope Cable for STORZ H3-Z Продавец: Hangzhou Sihan Medical Equipment Co., Ltd Endoscope Cable for STORZ H3Z Introducing the brand new STORZ H3-Z Cable Replacement, meticulous...
Steel Fiber For Industrial Floors
Steel Fiber For Industrial Floors Продавец: Tengzhou Star Smith Metal Products Co.,Ltd Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground ...
Orivision DVI Extender
Orivision DVI Extender Продавец: Nantong ZYDZ Electronic Co., Ltd. Orivision DVI Extender ORIVISION offers a wide selection of products for extending DVI video, aud...
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out Продавец: Nantong ZYDZ Electronic Co., Ltd. Brand: ORIVISION Model: ZY-DS931 Input Interface: LAN Port*1 Output Interface: SDI*2, audio*1 Vid...