Fiber Optic Switch
The fiber optical switchAGS14 is a non-mechanical designed fiber optic device based on the Faraday effect with Bi-refringent crystal and micro-optical components. Without moving parts in the design, the switch can meet the high requirement on reliability, durability and high switching speed.
Features Of Fiber Optic Switcher
High Speed
Non-Mechanical
High Stability & Reliability
Application Of Fiber Optic Switcher
Fiber Optical Sensing
Switching
Latching
Signal Monitoring
Specification Of Fiber Optic Switcher
1x4 |
Min |
Typical |
Max |
Unit |
Operation Wavelength |
1500 |
1550 |
1600 |
nm |
Insertion Loss |
dB |
|||
PDL |
dB |
|||
ER(PM version) |
18 |
dB |
||
Cross Talk |
32 |
50 |
32 |
dB |
PMD |
ps |
|||
Return Loss |
50 |
dB |
||
Durability |
1011 |
cycle |
||
Operating Temperature |
-5 |
70 |
℃ |
|
Optical Power |
500 |
mW |
||
Storage Temperature |
-40 |
85 |
℃ |
|
Switch Type |
Latching |
|||
Fiber Type |
SMF28 / PM1550 |
|||
Switch Time |
ms |
|||
Power Input |
DC 12V |
|||
Dimension |
152mm*142mm*50mm |
Serial (RS-232) Interface
Electrical characteristics: Conforms to the EIA-574 standard (EIA-232 (RS-232), 9-pin) Baud rate: 2400, 9600, 57600, 115200, 230400
Start bit: 1 bit, fixed Data length: 8 bit, fixed
Parity: Odd, Even, or None Stop bit: 1 bit(default)
Connector: DELC-J9PAF-13L6 (JAE or equivalent) Flow control: None
UART bit formats are listed in the following table:
Parity |
UART frame |
None |
| Start bit | 8-bit data | Stop bit | |
Odd/Even |
| Start bit | 8-bit data | Parity bit | Stop bit | |
Ethernet Interface
Electromechanical specifications: Conforms to IEEE802.3 Transmission method: 10BaseT/100BaseTX Ethernet Communication protocol: TCP/IP
Connector type: RJ45
Port number used: 8080 (fixed)
Configure Network Information
Visit the website , 192.168.1.100 is a device IP address. The default network information is on the nameplate attached to the device.
Fiber Optic Switcher
Note: Visit configuration website will increase the switch time when the AGS14 is working at switch mode.
The Ethernet port just supports static IP mode, please avoid conflict with other network devices in the same subnet. If the device has been set to the wrong IP and can`t be accessed any more,push the Restore Button for 6 seconds to restore the default settings. When push down the Restore Button, the LED will twinkle until restore succeed.
Data Frame Formats About TCP/UART
A complete frame contains 2 bytes: fixed start byte and command byte. Start byte Command byte
0xF0(Fixed) 1-byte data
Once the client transmits the command, it needs to wait for the device to reply.
Function |
Transmit frame (hexadecimal) |
Reply frame (hexadecimal) |
Say hello, use for test connection, the device will do nothing |
0xF000 |
0xF000 |
Switch to channel 1 |
0xF001 |
0xF001 |
Switch to channel 2 |
0xF002 |
0xF002 |
Switch to channel 3 |
0xF003 |
0xF003 |
Switch to channel 4 |
0xF004 |
0xF004 |
AtGrating is a professional supplier forfiber optic sensing. AtGrating offers industrial solutions by providing customized sensors and sensing instruments that add value, reduce uncertainty, and maximize performance from our customer systems.
We also have sorts of fiber optic pressure sensorfor sale, if you have needs, please leave us a message.
在线联系供应商
Other supplier products
FBG Pressure Sensor PT-01 | Fiber optic pressure transducerPT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade ... | |
FBG Temperature Sensor CT-01 | FBG Temperature Sensor CT-01 is made of high-voltage resistant insulating materials, and the sensing part is made of high-temperature thermal condu... | |
FBG Array & Cable | For different applications, there are multi-points monitoring requirements, we offer all kinds of packaged fbg sensor arraywhich different waveleng... | |
Athermal Packaged FBG | Athermal FBG is a method of compensating the temperature coefficient of fiber grating with a negative temperature coefficient packaging sleeve. It ... | |
Chirped FBG | Chirped FBG The grating period of Chirped FBG is not constant, but varies along the axial direction. Different grating periods correspond to diffe... |
Same products
Steel Fiber For Industrial Floors | 卖方: Tengzhou Star Smith Metal Products Co.,Ltd | Steel Fiber For Industrial Floors Steel fiber reinforced concrete industrial building ground ... | |
Orivision DVI Extender | 卖方: Nantong ZYDZ Electronic Co., Ltd. | Orivision DVI Extender ORIVISION offers a wide selection of products for extending DVI video, aud... | |
Orivision H.265 1080P@60 IP To SDI Video Decoder With Loop Out | 卖方: Nantong ZYDZ Electronic Co., Ltd. | Brand: ORIVISION Model: ZY-DS931 Input Interface: LAN Port*1 Output Interface: SDI*2, audio*1 Vid... | |
The Difference Between Fiber Patch Cord and Fiber Pigtail | 卖方: Sumbexauto | The Difference Between Fiber Patch Cord and Fiber Pigtail Fiber pigtails patch cordsare cables d... | |
The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver | 卖方: Sumbexauto | The100g optical transceiveris an optoelectronic device that performs electro-optical and photoele... |