Shoe Abrasion Tester

Product Introduction:

The whole shoe wear testing machine is used to test the wear resistance of soles and sole pieces. The principle is to press the rotating grinding head vertically above the sample, and carry out rotary wear test on the test sample at a certain load weight and a speed of 191r/min. After the test is completed, the wear length of the sample is measured to evaluate whether the sample is qualified.

Reference standard:

GB/T 3903.2-2017. QB/T4329-2012 and other standards

Product Advantages:

Measures Key Durability: Quantifies the wear resistance of shoe soles, a direct indicator of footwear durability and expected lifespan.

Standard Compliant: Designed to meet national standards (GB/T 3903.2. QB/T 4329) for shoe wear testing.

Controllable Test Parameters: Allows for precise control of load, speed, and test time according to standard requirements.

Uses Standardized Abrasive: Utilizes a grinding wheel with detailed specifications to ensure consistent abrasive action.

Provides Quantitative Measurement: Enables evaluation based on wear length measurement (or potentially mass loss using the integrated balance).

Suitable for Soles and Materials: Applicable for testing both finished soles and samples of sole materials.

Includes Integrated Balance: The presence of a balance facilitates wear assessment by mass loss if required by the test method or user preference.

Product Features:

Rotary grinding head with a specified grinding wheel.

Mechanism for applying a vertical load (pressure) to the sample via the grinding head.

Sample holder to securely position the sole or sole piece for testing.

Motor and control system to rotate the grinding wheel at a controlled speed (191 ± 5 r/min, adjustable).

Timer to control the duration of the test (20 minutes, adjustable).

Detailed specifications for the grinding wheel, ensuring a standardized abrasive surface.

Integrated balance for weighing samples (5000g range, 0.5g accuracy).

Likely includes a counter to track the number of rotations.

Designed for operation within specific temperature and humidity ranges.

Robust construction suitable for repeated use in a laboratory or quality control environment.

Method for measuring wear length (as mentioned in the introduction) - this could be a manual measurement using a scale after the test or an integrated measurement system, although not explicitly detailed.

Technical specifications:

Performance: Accurate weighing, stability, good repeatability, the use of environmental requirements: at a specific temperature (23±2℃)， measuring the weight of the material and water

Speed: (191±5)r/min(adjustable)

Load: 500g(5g-500g optional)

Test time: 20 minutes (adjustable)

Grinding wheel: 20±0.1 diameter 4±0.1mm thick, T12 steel grinding wheel, with 72 teeth, tooth Angle 90°±5°, tip width 0.2±0.05mm, tip roughness Ra=3.2um, hardness HRC³55. coaxiality 0.03mm

Balance range: 5000g, accuracy: 0.5g

Volume: 560×510×830mm

Weight: 70kg

Power supply: AC220V,10A

Другие товары поставщика

	Photovoltaic module insulation resistance tester	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta...
	G645 leather shoe hook stiffness testing machine	Product Introduction: Leather shoe hook stiffness tester is suitable for measuring the longitudinal bending stiffness of leather shoe hook. The pr...
	Nonwovens Synthetic Blood Penetration Tester	Introduction: Synthetic Blood Penetration Resistance Tester is developed for ranking the synthetic blood penetration resistance performance of med...
	Sample cutter 100cm	Sample cutter 100cm - Other test instrument - standard Standards: Applications: The application of sharp cutter wide. Even difficult mat...
	Hydrogen Sulfide Corrosion Test Chamber	A Hydrogen Sulfide (H2S) Corrosion Test Chamber is a specialized piece of equipment used to simulate and accelerate the corrosive effects of hydrog...

Все товары поставщика

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...