Shoe Peel Tester

Product Introduction:

Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.

Reference standard:

GB/T 15107-2013. GB/T 3903.3-2011. BS 20344. QB/T 4329-2012. QB/T 1002-2015.6.5 and other standards

Product Advantages:

Measures Key Bond Strength: Quantifies the adhesion strength between the sole and upper, a vital indicator of shoe durability.

Standard Compliant: Designed to meet numerous national and international standards for whole shoe peel strength testing.

Quantitative Result: Provides an objective numerical value (peeling force and calculated peeling strength) for the bond quality.

Controllable Test Parameters: Allows for precise control of the peeling speed, ensuring consistent test conditions.

Accurate Measurement: Utilizes a force sensor to accurately measure the peeling force.

Suitable for Finished Shoes: Designed to test complete shoes, simulating real-world stress on the sole-to-upper bond.

Adjustable for Different Shoe Sizes: Features adjustable components to accommodate a range of shoe sizes and shapes.

Product Features:

Based on the provided parameters and the whole shoe peel test principle:

Shoe last clamp or universal fixture system designed to securely hold a shoe in position during the test.

Peeling knife with specific, interchangeable widths (20 ± 0.2mm and 10 ± 0.1mm) used to initiate and control the separation of the sole from the upper.

Electric motor and control system for controlled downward movement of the peeling knife edge at an adjustable speed (20 ± 2 mm/min, with adjustable rise and fall speeds).

Force sensor or load cell integrated into the mechanism to measure the peeling force required to separate the sole from the upper.

System to calculate the peeling strength based on the measured force and the specified knife width.

Adjustable positioning rod and tie rod spacing (50-70mm adjustable) to accommodate different shoe sizes and sole configurations.

Dial gauge with a specified range (0.001-10mm) and accuracy (0.001) likely used to measure the progress of the peel or displacement.

Average lifting range (40mm) specifying the distance the peeling action can occur.

Electric operation powered by AC220V.

Robust construction suitable for testing finished footwear.

Technical parameters:

1. Peeling force: 1000N

2. peeling knife width: 20±0.2mm and 10±0.1mm

3. peeling knife edge down speed: 20±2mm/min, rise and fall speed is adjustable

4. positioning rod and tie rod spacing: 50——70mm adjustable

5. dial gauge: 0.001—— 10mm, accuracy: 0.001

6. the average lifting range: 40mm

7. volume (approx.) : 560×320×750mm

8. Power supply: 1∮， AC220V, 50HZ

9. Weight (approx.) : 45kg

Другие товары поставщика

	Horizontal paper tensile strength testing machine	Horizontal paper tensile strength testing machine - Other test instrument - standard Product Introduction: G103C horizontal tensile strength test...
	Profilometer	Product Introduction: The profiler is measured by the slip of the stylus of the instrument and the surface to be measured, and is a contact measur...
	Helmets Designated Protection Areas Tester	Main Purposes 1. Used to mark test points and test lines on helmets. 2. Used for line - marking according to different test standards. 3. Used t...
	Safety shoe voltage tester	Product Information: The safety shoe voltage resistance tester is mainly used to test the voltage resistance of safety shoes under specified condi...
	Cleanliness Analysis System	Production： The cleanliness analysis system fully complies with the requirements of standards such as VDA19.1 - 2015. ISO16232. ISO4406. ISO4407. ...

Все товары поставщика

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...