Shoe Peel Tester
Product Introduction:
Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the principle is to load the shoe on the shoe last clamp on the machine, peel the sole and the upper joint with the peeling knife, measure the force required when stripping force is the peeling force, and then calculate the peeling strength according to the peeling force and the width of the knife edge.
Reference standard:
GB/T 15107-2013. GB/T 3903.3-2011. BS 20344. QB/T 4329-2012. QB/T 1002-2015.6.5 and other standards
Product Advantages:
Measures Key Bond Strength: Quantifies the adhesion strength between the sole and upper, a vital indicator of shoe durability.
Standard Compliant: Designed to meet numerous national and international standards for whole shoe peel strength testing.
Quantitative Result: Provides an objective numerical value (peeling force and calculated peeling strength) for the bond quality.
Controllable Test Parameters: Allows for precise control of the peeling speed, ensuring consistent test conditions.
Accurate Measurement: Utilizes a force sensor to accurately measure the peeling force.
Suitable for Finished Shoes: Designed to test complete shoes, simulating real-world stress on the sole-to-upper bond.
Adjustable for Different Shoe Sizes: Features adjustable components to accommodate a range of shoe sizes and shapes.
Product Features:
Based on the provided parameters and the whole shoe peel test principle:
Shoe last clamp or universal fixture system designed to securely hold a shoe in position during the test.
Peeling knife with specific, interchangeable widths (20 ± 0.2mm and 10 ± 0.1mm) used to initiate and control the separation of the sole from the upper.
Electric motor and control system for controlled downward movement of the peeling knife edge at an adjustable speed (20 ± 2 mm/min, with adjustable rise and fall speeds).
Force sensor or load cell integrated into the mechanism to measure the peeling force required to separate the sole from the upper.
System to calculate the peeling strength based on the measured force and the specified knife width.
Adjustable positioning rod and tie rod spacing (50-70mm adjustable) to accommodate different shoe sizes and sole configurations.
Dial gauge with a specified range (0.001-10mm) and accuracy (0.001) likely used to measure the progress of the peel or displacement.
Average lifting range (40mm) specifying the distance the peeling action can occur.
Electric operation powered by AC220V.
Robust construction suitable for testing finished footwear.
Technical parameters:
1. Peeling force: 1000N
2. peeling knife width: 20±0.2mm and 10±0.1mm
3. peeling knife edge down speed: 20±2mm/min, rise and fall speed is adjustable
4. positioning rod and tie rod spacing: 50——70mm adjustable
5. dial gauge: 0.001—— 10mm, accuracy: 0.001
6. the average lifting range: 40mm
7. volume (approx.) : 560×320×750mm
8. Power supply: 1∮， AC220V, 50HZ
9. Weight (approx.) : 45kg
Send product request
Other supplier products
 |
rain tester AATCC 35 BS EN ISO 22958 | Standards: AATCC 35. BS EN ISO 22958 Applications: Rain Tester is designed for determining the water-repellent property of fabrics or composite ... |
 |
Photovoltaic module insulation resistance tester/ Solar panel insulation tester/IEC 61215 insulation resistance testing | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovol... |
 |
Lateral Rigidity Tester for Safety Helmets | Lateral Rigidity Tester for Safety Helmets - Material and Parts of Automotive - standard Standards: GB2812 Applications: It is used to te... |
 |
Leather Vamp Flexing Extensibility Testing Machine | Applications: Vamp Flexing Tester is used to determine the propensity for materials to crack or otherwise fail at flexing creases, but can also ... |
 |
Acceleration Impact Performance Testing Machine for Safety Helmets | Standards: GB2812 - 2019 Applications: This instrument is suitable for impact - collision tests of helmets. It is a testing instrument use... |
Same products
 |
Scott Flex Tester | Seller: Standard International Group (HK) Limited | Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o... |
 |
NEU nanofiber electrospinning device | Seller: Standard International Group (HK) Limited | Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil... |
 |
KK03 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK02 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
 |
KK01 Scratch tester | Seller: Standard International Group (HK) Limited | Product Introduction: With the continuous expansion of the use of plastic molding products, from... |
