Footwear Dynamic Waterproof Tester

• 

Product Introduction:

It is used to test the dynamic waterproof performance of various finished shoes, and the number of times when no water enters the finished shoes or the size of the water penetration area of the finished shoes after completing the specified number of twists and turns to evaluate the waterproof and permeability resistance of the finished shoes under the tortuous condition.

According to the criteria:

GB/T-16641. SATRA TM77

Product Advantages:

Measures Dynamic Waterproofness: Evaluates the shoe's ability to resist water penetration while actively flexing, simulating real-world walking conditions.

Standard Compliant: Designed to meet relevant international and national standards (GB/T 16641. SATRA TM77) for dynamic waterproof testing of finished footwear.

Quantitative Evaluation: Provides objective results based on the number of cycles to water entry or the extent of penetration after a set number of cycles.

Simulates Walking Flex: Applies repeated bending at adjustable angles and speeds to mimic the natural movement of the foot.

Multiple Testing Stations: Allows simultaneous testing of a pair of shoes, increasing efficiency.

Controllable Test Parameters: Provides precise adjustment of bending angle and speed.

Includes Cycle Counter: The integrated counter accurately tracks the number of flexing cycles.

Suitable for Various Shoe Types: Applicable for testing a wide range of finished footwear.

Test principle:

The finished shoe is installed on the finished shoe waterproof resistance zigzag test machine, driving the zigzag part of the tested finished shoe to the zigzag Angle matching the shoe type and the fixed rate of the zigzag machine in the sink equipped with a certain water depth and the water is dyed repeatedly zigzag until the finished shoe water or reach the pre-set zigzag number.

Main parameters:

Zigzag Angle: 5—— 60 degrees adjustable

Zigzag speed: 5—— 150 times/min adjustable

Test quantity: 2 finished shoes can be tested at the same time

Count: 0-999999(touch screen display, can be arbitrarily set)

Volume: 73*82* 108CM

Power supply: AC220V, 10A

Другие товары поставщика

	Textile Air Permeability Tester	Meet the standard: ASTM D737 ISO 9237 EDANA WSP 070.1 JIS L1096 Product Introduction: Air permeability is defined as the volume of air that...
	Polysilazane Resin STD-8812	Introduction STD 8812 is a vinyl-containing polysilazane resin that serves as a ceramic precursor. It cures under heating, exhibits excellent adhe...
	System of Spinal Pedicle Screw-Rod System Torsional Fatigue Tester	Standard YY/T 0857-2011 (China): Specifies torsional fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, freq...
	Gelbo Flex flexing chamber ISO 9073.10 YY/T 5056.6	Standards YY/T 5056.6 Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - Part 4: Dry...
	Helmets Acceleration Impact & Penetration Tester	Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorp...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...