G678W-L cold resistance testing machine for shoes
Все товары поставщика
Shoes cold resistance testing machine is used to test finished shoes, rubber, sole, synthetic leather, plastic and other test requirements under various low temperature environment to understand the ability of various materials or finished shoes to adapt to low temperature climate or cold terrain area, this instrument is made of rust SUS steel, can be installed with a variety of different test fixtures. In order to meet the different standards of various tests.
Meet the standard:
ASTM D17900, EN ISO 20344, HG/T 2411, HG/T 2871, DIN 53351, SATR TM55, Adidas GE-24, GE-57, GB/T 20991-2007 and other standards
Main parameters of cold box:
1, balanced temperature regulator humidity control system
2, temperature range: -25℃ —— +150℃
3, temperature fluctuation: ≤±0.5℃
4, temperature uniformity: ≤2℃
5, temperature accuracy: ±0.2℃
6, heating time: +25℃→+85℃ room temperature to 85℃ about 30 minutes no load
7, cooling time: +25℃→-40℃ room temperature to -40℃ about 50 minutes no load
8. Lead hole: φ50mm 1 （with 1 rubber plug）
9, heating rate: 3 —— 5℃/min（average）， cooling rate: 0.7 —— 1℃/min（average）
Shoe thermal test fixture set:
A: Cold medium: composed of 5mm diameter and 4kg total mass of stainless steel balls
B: Test copper plate: （350±5）*（150±1）*（5±0.1）mm
C: thermometer: accuracy is ±0.5 ° C
The fixture group should be configured according to actual test requirements or other standard requirements.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Coating abrasion resistance tester | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Fabric Friction Charging Charge Tester | Standards: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009; GB / T23316-2009 Applications: Fabric Friction Chargi... |
 |
Contact Heat Property Tester ISO 12127 EN 702 | Standards EN 702 Protective clothing-protection against heat and flame– Test method: Determination of the contact heat transmission through ... |
 |
Auto ignition Point Liquids Tester | Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005)... |
 |
Conveyor needle detector | Conveyor needle detector - Textile and Apparel - standard Applications: It is applicable to detect broken needle and iron matters inmany indust... |
Похожие товары
 |
Thrust Bearing Rolling Friction and Wear Testing Machine | Продавец: Standard International Group (HK) Limited | Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ... |
 |
Falling Sand Abrasion Test machine | Продавец: Standard International Group (HK) Limited | The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance... |
 |
Conveyor Belt Drum Friction Testing Machine | Продавец: Standard International Group (HK) Limited | Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes... |
 |
Dry Sand Rubber Wheel Wear Tester | Продавец: Standard International Group (HK) Limited | The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater... |
 |
Sliding Bearing Fatigue Testing Machine | Продавец: Standard International Group (HK) Limited | The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua... |
