Shoe Sole Heat Resistance Tester

• 

Main uses:

The sole heat resistance tester is used to test the heat resistance and temperature insulation performance of finished shoes under high temperature sand and stone heat temperature medium.

Reference standard:

EN ISO 20344. EN ISO 8772-1. GB/T 20991-2007. ANSI, JIS, CSA, GB12017-1989. LD50-1994 and other standards

Product Advantages:

Measures Critical Safety Property: Quantifies the thermal insulation and heat resistance of footwear soles, essential for safety in hot environments.

Standard Compliant: Designed to meet numerous relevant national and international standards for footwear heat resistance and thermal insulation testing.

Simulates Real-World Exposure: Uses a heated sand bath to mimic contact with hot surfaces.

Provides Objective Measurement: Records the actual temperature rise on the inside of the shoe (at the insole).

Controllable Test Temperature: Allows testing at standardized high temperatures (150℃ or 250℃).

Suitable for Finished Shoes: Designed to test complete footwear.

Product Features:

Heated sand bath with specific dimensions and minimum sand height.

Heating system capable of heating the sand to controlled test temperatures (150℃ or 250℃).

Temperature control system to maintain the sand bath at the specified test temperature with a certain tolerance.

System for accurately measuring and recording the temperature change on the upper surface of the insole over a specified time (30 minutes), using a copper/copper-nickel thermocouple with a copper disc.

Uses sand of a specific particle size range and volume as the primary heat transfer medium.

May include provisions for using other heat transfer media, such as 5mm steel balls, depending on the specific test standard or configuration.

Fixture or area for placing the finished shoe on the heated sand bath, ensuring good contact.

Robust construction suitable for operating at high temperatures.

Test principle:

The sandbox is heated to 150℃， the sand covers the contact point between the sample upper and the sole, and the change of the insole temperature over 30 minutes is recorded, accurate to 0.5℃。

Technical parameters:

Sand bath box size: (40±2)cm*(40±2)cm, height: 8cm

Sand height: ≥5cm

Sand size: (0.3 —— 1.0)mm

Sand volume: 5000±250cm

Test temperature: (150±5)℃ or (250±5)℃

Heating power: 2500±250W or more

Heat transfer medium: 5mm steel ball, total mass 4kg

Copper/copper-nickel thermocouple: Solder a copper disc 2±0.1mm thick and 15±1mm diameter

Другие товары поставщика

	Laminoplasty Plate System Fatigue Testing Machine	Standard ASTM F2193-18: Specifies static/fatigue testing protocols for spinal constructs, including lamina fixation plates. ISO 12189-1: Define...
	Auto ignition Point Liquids Tester	Standards: This product complies with GB/T 21860 - 2008 *Test Method for Auto - ignition Temperature of Liquid Chemicals* and ASTM E659 - 78(2005)...
	Paper absorbance tester	Paper absorbance tester - Other test instrument - standard Product Introduction: It is an instrument used to determine the surface water absorpti...
	KES - F8 Air Permeability Tester	Content The Air Permeability Tester is designed to quickly and accurately measure the breathability and permeability of a wide range of samples,...
	10kN Universal Testing Machine	Standards: 1. Manufactured according to GB / T2611 "General Technical Conditions for Testing Machines" and GB / T 16491-2008 "Electronic Univers...

Похожие товары

	Scott Flex Tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: Scott kneading tester is suitable for back and forth kneading resistance o...
	NEU nanofiber electrospinning device	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Content The Nanofiber Electrospinning Unit uses electrospinning techniques to safely and easil...
	KK03 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK02 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...
	KK01 Scratch tester	Продавец: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd	Product Introduction: With the continuous expansion of the use of plastic molding products, from...