Collection of needle rubber sleeve resilience tester

Производитель: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd

Все товары поставщика

Guide pin anchoring force tester - Other test instrument - standard

Standards:

YYT1618-2018 "Disposable Human Venous Blood Sample Collection Needle"

Product introduction

　　The collection needle rubber sleeve resilience tester evaluates the force measured by the

collection tube when it passes vertically through a die hole larger than 0.05 mm outside

diameter of the collection needle tube under test.

Technical parameter

　　1. Pressure test range: 0 — 50N, error is not more than ±1%, resolution 0.01N.

　　2. Test time: 1-999S, any choice, the error is not more than ±0.5S.

　　3. Test speed: 50mm/min, 80mm/min, 100mm/min error is not more than ±2%.

　　4. Printing method: Each time can print 8, 10 test data or 13 test data and the average

piercing force and deviation value.

　　5. Measuring distance: 0 — 50mm, error is not more than ±0.1mm.

Operation method

　　1. Insert the needle at the butt end into the die hole of the clamping fixture 2mm above

the surface.

　　2. Start the test device to compress the rubber sleeve.

　　3. Measure the rubber sleeve resilience at 5mm and 15mm between the needle tube and

the needle base.

　　4. The test result is 0.5N≤ the rubber sleeve resilience ≤1.5N.

	Differential Scanning Calorimetry Tester	Scope of application: It is used to analyze the thermal effect and corresponding temperature when the physical or chemical properties of organic a...
	Mask BFE Testing Machine	Mask BFE Testing Machineis used to test the percentage of material containing bacterial suspended particles at a specific flow rate. Features: ...
	Wet leakage current test system of photovoltaic module	Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta...
	KK01 Scratch tester	Product Introduction: With the continuous expansion of the use of plastic molding products, from the point of view of the surface appearance of mo...
	Roller Abrasion Tester	Applications: The test roller is clamped by the test arm through the bearing. During the test, the actual use condition of material is simulated b...

Thrust Bearing Rolling Friction and Wear Testing Machine	Продавец: Standard International Group (HK) Limited	Applicable Standards: ASTM D3702 ASTM G99 ASTM G77 ISO 18535 Product Advantages: Simulates ...
Falling Sand Abrasion Test machine	Продавец: Standard International Group (HK) Limited	The sand abrasion tester is a specialized testing device used to evaluate the abrasion resistance...
Conveyor Belt Drum Friction Testing Machine	Продавец: Standard International Group (HK) Limited	Main Purposes of Conveyor Belt Drum Friction Testing Machine The conveyor belt drum friction tes...
Dry Sand Rubber Wheel Wear Tester	Продавец: Standard International Group (HK) Limited	The dry sand rubber wheel abrasion tester is mainly used to test the abrasion resistance of mater...
Sliding Bearing Fatigue Testing Machine	Продавец: Standard International Group (HK) Limited	The sliding bearing fatigue testing machine is an important testing device, mainly used to evalua...