CERAMIC STRUCTURED PACKING

Ceramic Structured Packing

Ceramic structured packingis made up of many packing unit bodies that share the same geometry shape. Corrugated ceramic packing is called Kelapak packing abroad, it is also called high-efficiency packing, because its separation-efficiency is several times more than ten times of loose cops packing. Compared with loose cops plate Tower Packing. Corrugated plate ceramic packing has a great number of advantages such as high-efficiency, large thruput, low liquid holdup, unsharp amplification and good operability.

Normal iron content

Low iron content

Parameters of Ceramic Structured Packing

Type	Specific Surface Aream2/m3	CorrugatedPlate thickness mm	Heaping weightKg/m3	PressureDrop mmHg/m	TheoreticalPiecesm-1	LiquidLoad m3/m2h	MaxFactorm/s (kg/m3)-1
100Y	100		300		1
125Y	125		330		1-1.5		3
160Y	160		370	2
250Y	250		420	2
350Y	350		470
400Y	400		500	3	3		2
450Y	450		520	4	4
550Y	550		620		5-6
700Y	700		650	6	7
100X	100		280		1
125X	125		300
160X	160		350	2			3
250X	250		380
350X	350		450	3
400X	400		480	4
450X	450		500		3-4		2
470X	470		440	5	5
550X	550		620		5-6
700X	700		650	6	7

SiO2	Al2O3	Fe2O3	CaO	MgO	Other
≥72%	≥23%	≤0.5%	≤1.0%	≤0.1%

Specific weight	Water adsorption	Acid resistance	Crushing strength	Operation temperature	Moh’s hardness	Ignition lost
	≤0.5%	>99.5%	≤1000℃	≥130Mpa	≥7	≤5.0%

Advantage of Ceramic Structured Packing

The most economical range of this structured tower packing is F-factor 1.5-2.0

The pressure drop of each theoretical sheet is 0.3-1 mbar

The minimum liquid load of the ceramic tower packing is 2001/m2h

A distributor should be installed for every 3-4 meters inside packing towers with diameters of more than 300 mm

Application of Low Iron Content Ceramic Packing

Fining process of corrosive mixtures, which have strict requirements for pressure drop and number of theoretical sheets.

Vacuum treatment under absolute pressure higher than 1 mbar.

Fining and Distillation of halogen organic compounds.

NAIKEChemical has been established from the consortion of several existing factories since 1973. Nowadays, Naike chemical is developing to the top leading manufacturer of molecular sieve products and mass transfer products(column packing and column Internal parts).

Другие товары поставщика

	CANNON RING/PROPAK	Cannon Ring/Propak Propak Cannon ring is a perforated plate chip, the shape is a half-cylindrical ring with many protruded holes. NAIKEChemical ...
	High Alumina Ball	High Alumina Ball Activated Alumina has the advantages of large surface area, many mciro-pores, well disperser, so it has a high affinity for wa...
	NAIKE CHEMICAL TOWER PACKING CENTER	Naikechemical is developing to the top leading mass transfer products manufacturer of Column packing, Column Internal parts. Molecular Sieve/Zeo...
	HY Zeolite	HY zeoliteis hydrogen molecular sieves with Y-type crystal results. HY Zeolite refers to the molecular sieve with HY crystal structure formed after...
	CERAMIC SADDLE PACKING	Ceramic Saddle Packing Description Ceramic Intalox Saddleis divided into two different types of products according to their properties, one is oft...

Все товары поставщика

Похожие товары

	Hot Melt Adhesive for Vacuum Insulation Panels	Продавец: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Vacuum Insulation Panels Supply & Technical Support Capabilities ...
	Hot Melt Adhesive for Packaging	Продавец: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Packaging Bond Strength & Durability: Hot melt adhesives provide i...
	Hot Melt Adhesive for Hygiene Products	Продавец: Foshan Rurga New Material Technology Co. ,Ltd	Hot Melt Adhesive for Hygiene Products refers to thermoplastic pressure‑sensitive adhesives ...
	Cover Tape	Продавец: Zhuhai Tongxi Electronics Technology Co., Ltd	Cover tapeis a strip material used for SMD packaging of electronic products, often used in conjun...
	Shampoo Bottles	Продавец: Shampoo Bottles	Shampoo Bottles KEYUANhas a wide range of containers for packaging bath and body care products s...