Heat Resistant Silicone Adhesive/Sealant - 3912R
heat resistant silicone glue/Sealant - 3912R
FEATURES OF GOLOHO-3912R
·UL certificated product(E254532)·One-part RTV silicone rubber·
Exposure to humid air can be cured at room temperature·
Flowing·
Form rubber elastomer·
Use at: -50~200℃·
Excellent insulating and flammability performance·
Resistance to weather, temperature, chemical erosion·
Can be exempted from ultraviolet light, ozone and chemical effects outdoors·
Color: red·
Multiple packaging sizes are available for this product, 50ml Al tubes, 310ml plastic bottles, 20L plastic buckets,·
Shelf life: 6 months from the production date
TECHNICAL DATA OF GOLOHO-3912R
|
Properties |
Results |
|
Appearance |
Flowing |
|
Color |
Red |
|
Surface cure min |
10~30 |
|
Integrated cure hr |
>24 |
|
Electric/mechnical properties(25℃, 75%, 7days) |
|
|
Specific gravity |
1.05~1.35 |
|
Durometer(Shore(A)) |
25~45 |
|
Tensile/shear strength(Mpa) |
>1.0 |
|
Adhesive strength(Mpa) |
>1.3 |
|
Elongation(%) |
150~350 |
|
Dielectric strength kV/mm |
>20 |
|
Dielectric constant 1mhz |
<3.9 |
APPLICATION SCOPE OF GOLOHO-3912R
Adhesion, sealing, shock absorption, insulation, shock and aging resistance of electronic componentsEspecially suitable for high temperature parts like electric irons and heat tubes.
HOW TO USE GOLOHO-3912R
Open the cap, fit the tip(accessory),cut the tip then extrude the adhesive on the piecework, finally screw the capThere will be a bit of cured adhesive in the outlet after a long time, extrude it before using again.Safety measuresFire measures
- Extinguisher
- Component: water, powder, carbon dioxide
USE AND STORAGE OF GOLOHO-3912R
·Avoid fireAvoid contact with skin, eyes and clothing. Wash eyes for 15min once touch with it. Remove material from skin with dry cloth, water and soapWash hands after usingStorage: protect from fire and keep in cool and dry place.Physical and chemical propertiesAppearance(color): redAppearance(state): flowabilityDensity(25℃): 1Solubility: indissolvableFlammability: inflammabilityVolatility: noneToxicitySkin erosion: noneEyes stimulation: lightKin stimulation: noneEnvironment impactThe product of combustion is hardly no toxicity to the environment or living thingsDisposal cautionscombustion before cureburying after cure
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Two-Part, 1 To 1 Mix Ratio Silicone Potting - 4313-AB | FEATURES OF two part silicone adhesive, Ratio Silicone Potting - 4313-AB Flammability,UL-94V0 certification Excellent resistance to high and low ... |
 |
RTV-1 Silicone Rubber | RTV-1 siliconeis a condensed silicone rubber that is gradually cured from outside to inside by contacting with moisture in the air. RTV-1 silicone ... |
 |
High Performance Silicone Adhesive/Sealant - 3334 | GOLOHO-3334is a kind of heat proof silicone adhesive. FEATURES OF GOLOHO-3334 Convenient: one-part, deoximation, rapid cure at room temperature Ne... |
 |
Two-Part, 1 To 1 Mix Ratio Transparent Silicone Gel - 324C-AB | Two-Part, 1 To 1 Mix Ratio Transparenttwo part silicone gel- 324C-AB SPECIAL FEATURESOF GOLOHO-324C-AB 1:1Two-part, 1:1 mix ratioLow viscosityRoom ... |
 |
Heat Resistant Silicone Adhesive/Sealant - 3912R | Heat Resistant Silicone Adhesive/Sealant - 3912R FEATURES OF GOLOHO-3912R UL certificated product(E254532) One-part RTV temperature resistant sili... |
Похожие товары
 |
LC12 Two-Component Solvent Free Silicone Conformal Coating | Продавец: Nanjing Silfluo New Material Co., Ltd. | Conformal Coating, also called silicone coating pcbelectronic circuit board protection oil, coati... |
 |
LA-17 Polyether Modified Short Chain Polysiloxane | Продавец: Nanjing Silfluo New Material Co., Ltd. | Polyether modified trisiloxaneshort chain polysiloxane. Compared to trisiloxane surfactant,it has... |
 |
LA-14 A Modified Trisiloxane and an Silicone Surfactant | Продавец: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of Silwet ECOand Xiameter(R) OFX-0309) A modified Trisiloxane and an silico... |
 |
LA-11 A Modified Trisiloxane and an Silicone Surfactant | Продавец: Nanjing Silfluo New Material Co., Ltd. | (It is a substitution of silwet l 77) A modified Trisiloxane and an silicone surfactant with supe... |
 |
KSS Potassium Diphenylsulfone Sulfonate | Продавец: Nanjing Silfluo New Material Co., Ltd. | KSS is a high heat stable PC additive. Equivalents to FR2025, EF-42. Description of KSS Potass... |
