Carbon Black
Carbon Black
Carbon blackis a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black in tiresis a kind of rubber auxiliary and a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics.
Specification of Carbon Black
Standard |
N110 |
N115 |
N121 |
N134 |
N219 |
N220 |
Item |
||||||
Ioding AdsorptionNumber g/kg |
145±8 |
160±8 |
121±7 |
142±8 |
118±7 |
121±7 |
DBP Absorption Number 10-5M3/kg |
113±7 |
113±7 |
132±8 |
127±7 |
78±7 |
114±7 |
DBP Compressed Sample10-5M3/kg |
89-105 |
89-105 |
103-119 |
95-111 |
67-91 |
90-106 |
CTAB surface Area103M2/kg |
117-135 |
119-137 |
112-130 |
124-144 |
98-116 |
102-120 |
Nitrogen Surface Area103M2/kg |
120-134 |
129-145 |
115-129 |
135-151 |
109-123 |
112-126 |
Tint Strength % |
115-131 |
115-131 |
111-127 |
123-139 |
115-131 |
108-124 |
Heating Loss %≤ |
3 |
3 |
3 |
3 |
||
Ash Content % |
||||||
45μm Sieve Residue % ≤ |
||||||
500μm Sieve Residue % ≤ |
||||||
Impurity |
no |
no |
no |
no |
no |
no |
stress at 300% Elongation Mpa |
-3.5±1.6 |
-3.4±1.6 |
-0.4±1.6 |
-1.8±1.6 |
-3.9±1.6 |
-2.3±1.6 |
Characteristics of vulcanized rubber |
N110: High reinforcing, super abrasion |
|||||
N115: High reinforcing, super abrasion |
||||||
N121: High reinforcing, super abrasion, high modulus |
||||||
N134: High reinforcing |
||||||
N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance |
||||||
N220: High reinforcing, high tear resistance, good processing |
||||||
Standard |
N375 |
N539 |
N550 |
N660 |
N762 |
N774 |
Item |
||||||
Iodine Adsorption Number g/kg |
90±7 |
43±6 |
43±6 |
36±6 |
27±6 |
29±6 |
DBP Absorption Number 10-5M3/kg |
114±7 |
111±7 |
121±7 |
90±7 |
65±6 |
72±7 |
DBP Compressed Sample10-5M3/kg |
88-104 |
73-89 |
77-93 |
66-82 |
53-65 |
57-69 |
CTAB surface Area103M2/kg |
87-105 |
34-48 |
35-49 |
29-43 |
23-35 |
23-35 |
Nitrogen Surface Area103M2/kg |
86-100 |
33-45 |
34-46 |
29-41 |
24-34 |
25-35 |
Tint Strength % |
106-122 |
- |
- |
- |
- |
- |
Heating Loss %≤ |
||||||
Ash Content % |
||||||
45μm Sieve Residue % ≤ |
||||||
500μm Sieve Residue % ≤ |
||||||
Impurity |
no |
no |
no |
no |
no |
no |
stress at 300% Elongation Mpa |
-1.6±1.6 |
-0.9±1.6 |
-2.6±1.6 |
-4.9±1.6 |
-4.1±1.6 |
|
Characteristics of vulcanized rubber |
N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion |
|||||
N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion |
||||||
N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion |
||||||
N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup |
||||||
N762: low reinforcing |
||||||
N774: semi-reinforcing, good elongation, high resilience, low compressed deformation |
||||||
Standard |
N234 |
N326 |
N330 |
N339 |
N347 |
N351 |
Item |
||||||
Coding Adsorption Number g/kg |
120±7 |
82±7 |
82±7 |
90±7 |
90±7 |
68±7 |
DBP Absorption Number 10-5M3/kg |
125±7 |
72±7 |
102±7 |
120±7 |
124±7 |
120±7 |
DBP Compressed Sample10-5M3/kg |
94-110 |
62-74 |
80-96 |
91-107 |
91-107 |
87-103 |
CTAB surface Area103M2/kg |
110-128 |
74-92 |
73-91 |
84-102 |
78-96 |
64-82 |
Nitrogen Surface Area103M2/kg |
112-126 |
71-85 |
71-85 |
84-98 |
78-92 |
64-78 |
Tint Strength % |
115-131 |
103-119 |
96-112 |
103-119 |
97-113 |
92-108 |
Heating Loss %≤ |
||||||
Ash Content % |
||||||
45μm Sieve Residue % ≤ |
||||||
500μm Sieve Residue % ≤ |
||||||
Impurity |
no |
no |
no |
no |
no |
no |
stress at 300% Elongation Mpa |
-0.4±1.6 |
-3.9±1.6 |
-0.9±1.6 |
|||
Characteristics of vulcanized rubber |
N234: High reinforcing, high abrasion, high modulus, good dispersion |
|||||
N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance |
||||||
N330: medium-high reinforcing and modulus, good processing |
||||||
N339: medium-high reinforcing, high modulus and hardness, good processing |
||||||
N347: medium-high reinforcing, high modulus and hardness, good processing |
||||||
N351: medium-high reinforcing, high modulus and hardness, good processing |
Packing of Carbon Black
20kg/package: 1MT/Pallet
1000kg/package: 1MT/Pallet
Or customized
Application of Carbon Black
Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber chemicals.
As one of carbon black suppliers, we can provide high quality carbon black N220, carbon black N330, carbon black N660for sale, if you have needs, please contact us.
If you are looking for a reliable rubber raw material manufacturer, please choose us, and we will be your best partner.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
Accelerator DPG | DPG without odour and poison. Density:1.13-1..19g/m³. Easily soluble in acetone, ethyl acetate; Soluble in benzene, ethanol; Slightly soluble ... | |
Carbon Black | Carbon Black Carbon blackis a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, includ... | |
Chafer Fabrics | Chafer Fabrics are the special industrial fabrics mainly made of Nylon 6, Nylon 66 and Polyester yarns. Chafer fabrichas quite high breaking streng... | |
Accelerator DCBS | The product possess the best ant scorching quality of sulfonamide type accelerators. Its ant scorching quality and processing safety in natural rub... | |
Chlorinated Butyl Rubber | Chlorinated Butyl Rubber Chloro butyl rubber CIIR is a copolymer rubber of chloro isobutylene and isoprene. It has many of the attributes of synth... |
Похожие товары
Pharmaceutical intermediates,Natural Botanical Extracts | Продавец: Ningbo Heavnelyherba Biotech Co., Ltd | chineseherbmedicine[at]yahoo.com (Please change[at]to @)hy651025[at]hotmail.com(Please change[at]... | |
Glass Bottles | Продавец: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Glass Bottles The production process of a glass jar/bottle refers to a series of action combinat... | |
Treatment Pump | Продавец: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Treatment Pump Cosmetic treatment pumpsare a kind of mechanical device with sealing function, re... | |
Preform | Продавец: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Plastic Bottle Preforms Plastic preformis generally referred to PET preform, which is produced b... | |
Plastic Tubes | Продавец: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Cosmetic Tube Containers Plastic tube, provided by cosmetic tube packaging suppliers, is one of ... |