Carbon Black
Carbon Black
Carbon blackis a material produced by the incomplete combustion of coal and coal tar, vegetable matter, or petroleum products, including fuel oil, fluid catalytic cracking tar, and ethylene cracking. Carbon black in tiresis a kind of rubber auxiliary and a form of paracrystalline carbon that has a high surface-area-to-volume ratio, albeit lower than that of activated carbon. It has high reinforcement property, small deformation, low calorification, good elasticity and flex stiffness characteristics.
Specification of Carbon Black
Standard |
N110 |
N115 |
N121 |
N134 |
N219 |
N220 |
Item |
||||||
Ioding AdsorptionNumber g/kg |
145±8 |
160±8 |
121±7 |
142±8 |
118±7 |
121±7 |
DBP Absorption Number 10-5M3/kg |
113±7 |
113±7 |
132±8 |
127±7 |
78±7 |
114±7 |
DBP Compressed Sample10-5M3/kg |
89-105 |
89-105 |
103-119 |
95-111 |
67-91 |
90-106 |
CTAB surface Area103M2/kg |
117-135 |
119-137 |
112-130 |
124-144 |
98-116 |
102-120 |
Nitrogen Surface Area103M2/kg |
120-134 |
129-145 |
115-129 |
135-151 |
109-123 |
112-126 |
Tint Strength % |
115-131 |
115-131 |
111-127 |
123-139 |
115-131 |
108-124 |
Heating Loss %≤ |
3 |
3 |
3 |
3 |
||
Ash Content % |
||||||
45μm Sieve Residue % ≤ |
||||||
500μm Sieve Residue % ≤ |
||||||
Impurity |
no |
no |
no |
no |
no |
no |
stress at 300% Elongation Mpa |
-3.5±1.6 |
-3.4±1.6 |
-0.4±1.6 |
-1.8±1.6 |
-3.9±1.6 |
-2.3±1.6 |
Characteristics of vulcanized rubber |
N110: High reinforcing, super abrasion |
|||||
N115: High reinforcing, super abrasion |
||||||
N121: High reinforcing, super abrasion, high modulus |
||||||
N134: High reinforcing |
||||||
N219: High reinforcing, low modulus, good elongation and resistance to tearing, good flex resistance |
||||||
N220: High reinforcing, high tear resistance, good processing |
||||||
Standard |
N375 |
N539 |
N550 |
N660 |
N762 |
N774 |
Item |
||||||
Iodine Adsorption Number g/kg |
90±7 |
43±6 |
43±6 |
36±6 |
27±6 |
29±6 |
DBP Absorption Number 10-5M3/kg |
114±7 |
111±7 |
121±7 |
90±7 |
65±6 |
72±7 |
DBP Compressed Sample10-5M3/kg |
88-104 |
73-89 |
77-93 |
66-82 |
53-65 |
57-69 |
CTAB surface Area103M2/kg |
87-105 |
34-48 |
35-49 |
29-43 |
23-35 |
23-35 |
Nitrogen Surface Area103M2/kg |
86-100 |
33-45 |
34-46 |
29-41 |
24-34 |
25-35 |
Tint Strength % |
106-122 |
- |
- |
- |
- |
- |
Heating Loss %≤ |
||||||
Ash Content % |
||||||
45μm Sieve Residue % ≤ |
||||||
500μm Sieve Residue % ≤ |
||||||
Impurity |
no |
no |
no |
no |
no |
no |
stress at 300% Elongation Mpa |
-1.6±1.6 |
-0.9±1.6 |
-2.6±1.6 |
-4.9±1.6 |
-4.1±1.6 |
|
Characteristics of vulcanized rubber |
N375: medium-high reinforcing, high modules and hardness, smooth surface of extrusion |
|||||
N539: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion |
||||||
N550: Medium-high reinforcing, high modulus and hardness, smooth surface of extrusion |
||||||
N660: medium-high reinforcing and modulus, good flex resistance, low heat buildup |
||||||
N762: low reinforcing |
||||||
N774: semi-reinforcing, good elongation, high resilience, low compressed deformation |
||||||
Standard |
N234 |
N326 |
N330 |
N339 |
N347 |
N351 |
Item |
||||||
Coding Adsorption Number g/kg |
120±7 |
82±7 |
82±7 |
90±7 |
90±7 |
68±7 |
DBP Absorption Number 10-5M3/kg |
125±7 |
72±7 |
102±7 |
120±7 |
124±7 |
120±7 |
DBP Compressed Sample10-5M3/kg |
94-110 |
62-74 |
80-96 |
91-107 |
91-107 |
87-103 |
CTAB surface Area103M2/kg |
110-128 |
74-92 |
73-91 |
84-102 |
78-96 |
64-82 |
Nitrogen Surface Area103M2/kg |
112-126 |
71-85 |
71-85 |
84-98 |
78-92 |
64-78 |
Tint Strength % |
115-131 |
103-119 |
96-112 |
103-119 |
97-113 |
92-108 |
Heating Loss %≤ |
||||||
Ash Content % |
||||||
45μm Sieve Residue % ≤ |
||||||
500μm Sieve Residue % ≤ |
||||||
Impurity |
no |
no |
no |
no |
no |
no |
stress at 300% Elongation Mpa |
-0.4±1.6 |
-3.9±1.6 |
-0.9±1.6 |
|||
Characteristics of vulcanized rubber |
N234: High reinforcing, high abrasion, high modulus, good dispersion |
|||||
N326: Medium-high reinforcing, low modules, good elongation and resistance to tearing, good flex resistance |
||||||
N330: medium-high reinforcing and modulus, good processing |
||||||
N339: medium-high reinforcing, high modulus and hardness, good processing |
||||||
N347: medium-high reinforcing, high modulus and hardness, good processing |
||||||
N351: medium-high reinforcing, high modulus and hardness, good processing |
Packing of Carbon Black
20kg/package: 1MT/Pallet
1000kg/package: 1MT/Pallet
Or customized
Application of Carbon Black
Carbon black is mainly used as reinforcing filler in tyres and other rubber products during the vulcanization process to improve the tensile strength and wear resistance of styrene-butadiene, such as rubber conveyor belts, rubber hose, Airsprings and other rubber chemicals.
As one of carbon black suppliers, we can provide high quality carbon black N220, carbon black N330, carbon black N660for sale, if you have needs, please contact us.
If you are looking for a reliable rubber raw material manufacturer, please choose us, and we will be your best partner.
Send product request
Other supplier products
Brominated Butyl Rubber | Bromo butyl rubberBIIR is a copolymer rubber of bromo isobutylene and isoprene. It is derived from halogenating butyl rubberwith bromine in a conti... | |
Chafer Fabrics | Chafer Fabrics are the special industrial fabrics mainly made of Nylon 6, Nylon 66 and Polyester yarns. Chafer fabrichas quite high breaking streng... | |
Butyl Rubber | Butylrubberis a synthetic elastomer made by combining isobutylene and isoprene. It is a white or off-white translucent elastomer with a density of ... | |
Accelerator TBBS | TBBS rubberis a Vulcanization accelerator with delayed action, short cure time, has high anti-scorching quality, processing safety. It is white or ... | |
Bead Wire | Bead Wire, is a kind of steel wire plated with bronze, copper or brass as reinforcement of bead on Tyres. The Bead ring woven by the bead wire an... |
Same products
Pharmaceutical intermediates,Natural Botanical Extracts | Seller: Ningbo Heavnelyherba Biotech Co., Ltd | English Name CAS No PDRN 4-Hexylresorcinol 136-77-6 Ferulic Acid 1135-2... | |
Glass Bottles | Seller: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Glass Bottles The production process of a glass jar/bottle refers to a series of action combinat... | |
Treatment Pump | Seller: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Treatment Pump Cosmetic treatment pumpsare a kind of mechanical device with sealing function, re... | |
Preform | Seller: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Plastic Bottle Preforms Plastic preformis generally referred to PET preform, which is produced b... | |
Plastic Tubes | Seller: ZHEJIANG B.I. INDUSTRIAL CO., LTD. | Cosmetic Tube Containers Plastic tube, provided by cosmetic tube packaging suppliers, is one of ... |