Station Post Insulator
We offer different kinds of Station Post Insulator for Substation, such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc.
Contact us get more details about Station Post Insulator, such as TDS, Application Method, OEM etc.
We can supply different type of Station Post Insulator, also customer required.
The Introduction of Station Post Insulator
The station post insulator is a special insulation control that can play an important role in overhead transmission lines. In the early years, the station post insulators high voltagewere mostly used for utility poles. Then it slowly developed into a high-voltage high-voltage wire connection tower with one end hanging a lot of suspended insulators. It was used to increase the creepage distance, usually made of silica gel or ceramic, called insulator.Insulators play two fundamental roles in overhead transmission lines: one is supporting the conductors and the other is preventing current from returning to the ground. Insulators should not fail due to flashover breakdown due to changes in environmental and electrical load conditions, which can compromise the use and operational life of the entire line.
The Features of Station Post Insulator High Voltage
The insulator has high mechanical strength, small dispersion and safe and reliable operation.
The insulator has good mechanical properties at low temperature.
Excellent stain resistance.
High level of earthquake resistance.
Low radio interference.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
RTV High Voltage Insulator Coating | RTV High Voltage Insulator CoatingAnti-pollution Flashover Coating (RTV) High Voltage Insulator Coatings (HVIC) To prevent the electrical equipmen... |
 |
Busbar Insulation Coating | The silicone rubber insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending techn... |
 |
High Voltage Insulator Coating Series | High Voltage Insulator Coatings(HVIC) is used on excessive voltage insulators to forestall flashover and arcing, particular in severely contaminate... |
 |
Anti-Algae & Anti-Fouling Coating | Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in C... |
 |
Epoxy Zinc-Rich Primer | Instructions of Epoxy Zinc-Rich Primer It is two components epoxy zinc-rich primer heavy corrosion by a zinc primer, epoxy resin and other compone... |
