Station Post Insulator
We offer different kinds of Station Post Insulator for Substation, such as Circuit Breaker (CB), Post Insulator, Disconnector, Potential Transformer (PT), Surge Arrester, etc.
Contact us get more details about Station Post Insulator, such as TDS, Application Method, OEM etc.
We can supply different type of Station Post Insulator, also customer required.
The Introduction of Station Post Insulator
The station post insulator is a special insulation control that can play an important role in overhead transmission lines. In the early years, the station post insulators high voltagewere mostly used for utility poles. Then it slowly developed into a high-voltage high-voltage wire connection tower with one end hanging a lot of suspended insulators. It was used to increase the creepage distance, usually made of silica gel or ceramic, called insulator.Insulators play two fundamental roles in overhead transmission lines: one is supporting the conductors and the other is preventing current from returning to the ground. Insulators should not fail due to flashover breakdown due to changes in environmental and electrical load conditions, which can compromise the use and operational life of the entire line.
The Features of Station Post Insulator High Voltage
The insulator has high mechanical strength, small dispersion and safe and reliable operation.
The insulator has good mechanical properties at low temperature.
Excellent stain resistance.
High level of earthquake resistance.
Low radio interference.
Send product request
Other supplier products
 |
Hollow & Bushing Insulator | Hollow & Bushing InsulatorWe offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post I... |
 |
Electric Cleaning Agent | Electrical Equipment CleaningAgent is mainly used for eradicating dirt, dust, and contaminations on the power equipment surface especially clean t... |
 |
Composite Insulator | As the composite insulators manufacturers, we offer different kinds of composite polymer insulator. Contact us get more details about composite ins... |
 |
Busbar Insulation Coating | The silicone rubber insulation coating is made from special silicone rubber, high-performance material and other polymers by polymer blending techn... |
 |
Silicone Rubber Shield for Porcelain Insulators | Silicone Rubber Shield for Porcelain Insulatorscan used to protect the 10-35kV overhead power line insulators (such as pin porcelain insulator, cap... |
