DRINKING WATER TANK PAINT
Before the 1950s, water tank inside paint on ships worldwide were protected by cement slurry. It has proved that the cement slurry is very brittle after drying, and it is easy to crack and peel when it is subjected to shock and vibration. Tank walls often rust and pollute drinking water in less than half a year. Thus, it can be seen that the drinking water tank paint is really crucial to the guarantee of the quality of the water. Now the commonly used paints for inside water tanks are pure epoxy coatings and solvent-free epoxy coatings. There are epoxy potable water tanks, anti-fungal paint for water tanks, epoxy paint for water tank interior, etc.. Urushiol coatings are not used much due to the relatively thin film formation of a single layer. Water tank inside paint must be approved by the health department to be harmless to health before it can be used. Anyhow, there must be food grade paint for water tanks to ensure the quality of our drinking water.
In order to meet the corresponding specifications, solvent-free drinking water tank coatings are currently widely used. Solvent-based epoxy coatings will release a certain peculiar smell during use. Solvent-free epoxy can be used for thick film construction, and the film formation can reach 200-500μm in one film. In the drinking water tank, two coats are recommended, with a total dry film thickness of 300-400μm.
Types of Drinking Water Tank Paint
High-Build Epoxy Drinking Water Tank Anticorrosive Paint(FDA)
Benefits and Features of Drinking Water Tank Paint
Benefit and features
Solvent-free epoxy coating are mostly used for drinking water tanks, drinking water pipes and container engineering. The formed coating film obtains the advantages of smooth surface, low roughness, small friction coefficient, low water absorption, low microbial adsorption, and good adhesion between the coating and the substrate. Solvent-free epoxy paint for water tanks do not contain organic solvents. This kind of drinking water tank paint is safe, harmless to the human body, and have no environmental pollution. It avoids the problem of solvent-based coatings polluting the environment and wasting a lot of organic solvents during application and dring. In addition, the solvent-free coating does not volatilize the solvent during the curing process, the paint film is dense, and the dielectric property is improved. The solvent-free epoxy for water tank is corrosion-resistant, and the film is thicker at one time application, which improves the construction efficiency, and reduces the construction time and cost. Solvent-free epoxy drinking water tank coating paint is with good abrasion resistance, bending resistance, impact resistance, medium corrosion resistance and good salt spray resistance. The hygienic indicators of our product meet the requirements of GB/5749-2006 and the corresponding international standards, and have obtained the hygienic license for drinking water sanitation and safety products issued by the Health Bureau.
JINHAI, as an excellent china coatings companies, offers a wide range of polyurea elastomer coatingfor you to choose from.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Underwater Curing Epoxy Coating | Underwater Curing EpoxyCoating Underwater paintare two-component, formulated with special resins, extender pigments, fillers and curing agents. It... |
 |
FUXI ® ASPHALT ANTICORROSIVE PAINT | Under FUXI® brand, Jinhai Special China Coatingshas developed our own formulation system, including epoxy, phenolic, alkyd, acrylic, silicone, ... |
 |
BALLAST TANK PAINT | The ballast tank is a complex structure, the tank is dark and wet, and the working conditions are bad. The steel must be shot blasted to ISO Sa 2.5... |
 |
Epoxy Enamel | Epoxy enamel is a two-component self-drying paint composed of epoxy resin, pigments, additives, solvents and curing agents. The enamel epoxy paintf... |
 |
High Chlorinated Polyethylene Anticorrosive Intermediate Paint | High chlorinated polyethyleneanticorrosive Intermediate Paint is composed of high chlorinated polyethylene resin, anticorrosive pigments, additives... |
