SMC Cable Braket
The SMC cable bracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC CableBraket Specification
|
Project |
SMC Cable Braket |
Galvanized angle bracket |
|
Density (g/cm3) |
||
|
Specific strength |
167 |
90 |
|
Corrosion resistance (80°/100h) |
||
|
Insulation strength (kv/mm) |
Conductive |
|
|
Flame retardancy |
meets the FH-1 |
-- |
|
Water resistance (%) |
-- |
|
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
|
insulation |
insulation |
Conduction |
|
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
|
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
|
Weight |
light |
weight |
|
Eddy current effect (loss) |
no |
Large loss |
|
Manufacturing process is difficult |
easy |
Many processes and long cycle |
|
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
|
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
|
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
|
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
|
Use life |
30 years |
10 years |
The high-composite precision molds produced by Waiwai Tree have the characteristics of low energy consumption; our SMC and BMCmoldinghave no waste, and there is no need to clear the inner cavity. Having only a small temperature difference, our SMCBMC compositehave stable mold temperature, good appearance, and high efficiency. Thus, they are now widely used in new energy vehicles, high-speed rail, and electric motors.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
BMC/SMC Mould | BMC/SMC Moulding Description: We mainly use injection molding and pressure molding as the methods. When designing the flow channel and parting surf... |
 |
BMC, SMC, GRP, GFK Ceiling | Ceiling is a kind of decoration on the top of living environment. In short, it refers to the ceiling decoration, is an important part of interior d... |
 |
BMC/SMC Insulation | High-strength, wear-resistant, fire-resistant, color BMC material for medium and low voltage insulators such as SMC Insulation, bmc insulation. Typ... |
 |
SMC/BMC Antenna Reflector | (1) High precision, high efficiency, and high gain. The most important job of using SMC for the manufacture of antennas is to fully exploit its fe... |
 |
BMC/SMC Mould | BMC/SMC plastic moldingDescription: We mainly use injection molding and pressure molding as the methods. When designing the flow channel and partin... |
