SMC Cable Braket
The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC Cable Braket Specification
Project |
SMC Cable Braket |
Galvanized angle bracket |
Density (g/cm3) |
||
Specific strength |
167 |
90 |
Corrosion resistance (80°/100h) |
||
Insulation strength (kv/mm) |
Conductive |
|
Flame retardancy |
meets the FH-1 |
-- |
Water resistance (%) |
-- |
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
insulation |
insulation |
Conduction |
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
Weight |
light |
weight |
Eddy current effect (loss) |
no |
Large loss |
Manufacturing process is difficult |
easy |
Many processes and long cycle |
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
Use life |
30 years |
10 years |
SMC and BMC compositerequire heating rather than cooling systems. The temperature of the mold is usually between 130 and 160. It is very important to keep the temperature of the mold and the exhaust gas when designing the mold. The mold is easier to fill, the product is not easy to be deformed, and the surface is better. Commonly used heating systems are steam, oil and electric heating rods.
Established in 2010 and located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province, Zhejiang Aobang Technology Co., Ltd. has extensive bulk molding compound processand many refined testing laboratories as a spinal column in the industry. Whether at home or abroad, Zhejiang Aobang Technology Co., Ltd. can manufacture top quality bmc compoundmolds with advanced mold making concept, proprietary application technology and production technology. By the way, being a high-tech enterprise, it is a fact that this company enjoys a good fame in the new motor and energy automobile industry in Hangzhou.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
BMC/SMC Molds | Custom high Precision Compression/Injection Moulds Manufacturing with fast lead time BMC/SMC Mould Manufacturer As one of sheet molding compoun... | |
Flange Molding | mainly for injection molding, the cavity pressure should be considered as small as possible when designing the runner and the parting surface. Sinc... | |
Auto Parts Mould | Auto Parts Mould Features Injection molding and pressure molding are the main methods. When designing the flow channel and parting surface, the... | |
SMC Antenna Reflector Mould | SMC AntennaReflector Mould The satellite earth antenna is the important earth satellite equipment to collect the weak signal from satellite and re... | |
SMC Automotive Molding, Car Mould | Cars, buses, trucks, transport and special vehicles • Weight: Parts made from sheet molding compound (automotive smc) are typically 25-35%... |
Похожие товары
Car Mat Aluminium Vacuum Mould | Продавец: Hebei Shuiyuan Trading Co., Ltd | Product Description Vacuum molding is the most popular technology for shaping plastic raw mate... | |
Auto Mould-Safe and Convenient Operation | Продавец: Taizhou Wanda Plastic Mould Co.,Ltd. | Product Name Auto Parts Mould Brand Wanda Mould Model No specific Model Material S136/H1... | |
SMC Cable Braket | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | The SMC cablebracket is a combination consisting of a cable bracket, a post and a fixed pin. The ... | |
SMC/BMC Antenna Reflector | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | (1) High precision, high efficiency, and high gain. The most important job of using SMC/BMC for ... | |
BMC/SMC Insulation | Продавец: ZHEJIANG AOBANG TECHNOLOGY CO.,LTD | High-strength, wear-resistant, fire-resistant, color BMC material for medium and low voltage insu... |