SMC Cable Braket
The SMC cable bracket is a combination consisting of a cable bracket, a post and a fixed pin. The material of the column and the pin is also made by the high temperature pultrusion of the FRP composite. The column can be arbitrarily cut length according to the needs, the height of the layer is adjusted, and the assembly is free. The cable bracket has various specifications to meet different lengths and load requirements.
Light weight, high strength, aging resistance, UV protection, more importantly, 1 mm can withstand voltages above 10,000 volts, it is a good insulation material.
Features: high insulation, chemical resistance, high fire resistance, good water resistance, accurate size, stable working performance, light weight, high strength, acid and alkali resistance, waterproof, moisture-proof.
SMC CableBraket Specification
|
Project |
SMC Cable Braket |
Galvanized angle bracket |
|
Density (g/cm3) |
||
|
Specific strength |
167 |
90 |
|
Corrosion resistance (80°/100h) |
||
|
Insulation strength (kv/mm) |
14 |
Conductive |
|
Flame retardancy |
meets the FH-1 |
-- |
|
Water resistance (%) |
-- |
|
|
Corrosion resistance |
Corrosion、acid、alkali、salt resistant |
Corrosive, easy to rust |
|
insulation |
insulation |
Conduction |
|
Mechanical strength |
Top force 2.5kN deflection 1.0cm |
Top force 2.5kN deflection 1.2cm |
|
Lateral force 0.5kN |
Top horizontal offset 7cm |
Top horizontal offset 7cm |
|
Weight |
light |
weight |
|
Eddy current effect (loss) |
no |
Large loss |
|
Manufacturing process is difficult |
easy |
Many processes and long cycle |
|
Cable outer sheath scraping test |
No visible damage |
There is a little visible damage |
|
Raw material |
Cheap, resource-rich |
More expensive, partially imported |
|
Maintenance |
Free maintenance |
5-7 years need to be repaired once |
|
Installation process is difficult or easy |
Short time and easy to install |
Long time, difficult to install |
|
Use life |
30 years |
10 years |
Zhejiang Aobang Technology Co., Ltd. was established in 2010 and is located in Chengnan Development Zone, Luoshe Town, Huzhou City, Zhejiang Province. It has complete production equipment and sophisticated testing and laboratory. It is a backbone enterprise that manufactures polymer bmccompositemolds at home and abroad. With advanced mold making concept, production technology and proprietary application technology, the company enjoys a high reputation in the new energy automobile and motor industry and is a high-tech enterprise in Hangzhou.
As a bmc compoundmanufacturer, we will do our best to meet all the needs of customers.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Frame Moulding | Frame Moulding Features Frame Moulding includes BMC Frame Moulding and SMC Frame Moulding which is mainly for pressure molding, the cavity pressur... |
 |
SMC/BMC Antenna Reflector | High precision, high efficiency, and high gain The most important job of using bmc reflectorfor the manufacture of antennas is to fully exploit it... |
 |
BMC, SMC, GRP, GFK Wall Panel | Are you looking for smc composite? Aobang composite Wall Panel is divided into: BMC Wall Panel, SMC Wall Panel, GRP Wall Panel, GFK Wall Panel. Co... |
 |
Low-Voltage Electrical Products | Low Voltage Electrical Appliance Mould Manufacturer Mainly refers to circuit breakers, fuses, switch boxes, transformers, electric control boxes, ... |
 |
BMC, SMC, GRP, GFK Ceiling | The BMCcompositeprecision molds produced by Waiwai Tree have the characteristics of low energy consumption; our SMC and BMC moldinghave no waste, a... |
