EP hybrid powder coating

• 

Getaquote

whats/app：+86 132 6275 2056

WEB: std-coatings.com

Product description

It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the produced coating has excellent leveling, decorative, mechanical properties and strong corrosion resistance.

Application areas:

Widely used in the coating of various indoor metal products.

Physical properties:

1. Specific gravity: 1.2-1.8 (depending on color and gloss)

2. Storage: Below 35℃, in a dry environment, it can be stored for 12 months if the packaging is intact.

3. Packaging: 20 kg/box, carton packaging, lined with two layers of polyethylene inner bags.

Coating performance:

Application instructions:

Surface treatment: Treat according to the substrate and required performance

Spraying: Electrostatic gun or friction gun

Film thickness: 60-70 um

Curing conditions: Workpiece temperature/time: 180℃ x 15 minutes

Hygene & Safety:

This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.

Safety & protection

All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes is necessary, wash immediately with clean water and seek medical attention in time. Ash layer and powder particle deposition should be avoided on the surface and dead corners. Tiny organic particles will be ignited and explode under static electricity. All equipment must be grounded to prevent static electricity.

Другие товары поставщика

	High-Purity Helium	WA：+86 132 6275 2056 WEB: std-coatings.com Product Details Product Names Ultra-Pure Helium High-Purity Helium Helium Purity Ultra-Pure He...
	High temperature resistant powder coating	Introduction This series of products is a thermosetting powder coating designed and produced with special raw materials and has excellent heat res...
	Metal bonding powder	Introduction Accurate selection of powder has always been a problem for the powder industry. To solve this problem, we name the powder accordi...
	Low Cure Powder Coating – Energy-Saving Custom Solutions	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction Most powder coating chemistries required relatively high curing temperatu...
	Polyester Powder Coating Series	Made of epoxy resin and polyester resin as the main raw materials, it has excellent decorative properties, mechanical properties and good corrosion...

Похожие товары

	Metallic flat high gloss MT-049/98010	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co...
	Pure epoxy powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist...
	Epoxy polyester powder coating	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc...
	Pure polyester weather-resistant powder coating Factory Supplier	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris...
	Metallic flat semi-gloss Powder Coating MT-049/97003	Продавец: Standard International Group (HK) Limited	Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co...