EP hybrid powder coating
Getaquote
whats/app：+86 132 6275 2056
WEB: std-coatings.com
Product description
It is made of epoxy resin and polyester resin as the main raw materials, and has their own unique properties, so that the produced coating has excellent leveling, decorative, mechanical properties and strong corrosion resistance.
Application areas:
Widely used in the coating of various indoor metal products.
Physical properties:
1. Specific gravity: 1.2-1.8 (depending on color and gloss)
2. Storage: Below 35℃, in a dry environment, it can be stored for 12 months if the packaging is intact.
3. Packaging: 20 kg/box, carton packaging, lined with two layers of polyethylene inner bags.
Coating performance:
| Spraying area | 8-12 m2/Kg, film thickness 70μm (100% powder usage rate) | |
| Adhesion | GB/T 9286 | Grade 0 |
| Impact | GB/T 1732 | 50cm |
| Cupping test | GB/T 9753 | ≥ 6 mm |
| Bending test | GB/T 6742 | ≤ 3 mm |
| Pencil hardness | GB/ 6739 | ≥ H |
| Salt spray test | GB/T 1771 | 1000 h passed |
| Moisture and heat resistance | GB/T 1740 | 1000 h passed |
Application instructions:
Surface treatment: Treat according to the substrate and required performance
Spraying: Electrostatic gun or friction gun
Film thickness: 60-70 um
Curing conditions: Workpiece temperature/time: 180℃ x 15 minutes
Hygene & Safety:
This powder coating is a non-toxic product, but dust should be avoided during use. Operators are advised to wear appropriate dust masks and glasses. If possible, try to avoid long-term contact between skin and powder coating.
Safety & protection
All dust is irritating to the respiratory system, so avoid inhaling dust and steam generated during curing. Take measures to avoid skin contact. If contact is necessary, wash the skin with water and soap. If contact with the eyes is necessary, wash immediately with clean water and seek medical attention in time. Ash layer and powder particle deposition should be avoided on the surface and dead corners. Tiny organic particles will be ignited and explode under static electricity. All equipment must be grounded to prevent static electricity.
在线联系供应商
Other supplier products
 |
Soft Coral Gold powder coating | Product Features With a special skin feel formula, the surface of the coating after powder solidification has a touch similar to that of the skin,... |
 |
Epoxy Anti-Corrosion Powder Coating for Reinforcing Steel | Product Introduction:This product is a thermosetting epoxy-modified heavy-duty anti-corrosion powder coating specifically designed for reinforcing ... |
 |
Dimethicone High Viscosity Oils Element14 PDMS 60K | Introduction INCI Name: Dimethicone Product Description Element14 PDMS High Viscosity Oils are linear polydimethylsiloxane polymers with kinemat... |
 |
Powdfr Coating For General Industrial Use | Introduction Characteristics of powder coatings ”It does not contain toxic, solvent free, or volatile toxic substances, so it does not ha... |
 |
Epoxy Anti-Corrosion Dual-Resistance Powder Coating for Coal Mines | WA：+86 132 6275 2056 WEB: std-coatings.com Product Introduction: This product is formulated using phenolic epoxy resin and incorporates modifi... |
Same products
 |
Metallic flat high gloss MT-049/98010 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/98010 Co... |
 |
Pure epoxy powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model CH Product characterist... |
 |
Epoxy polyester powder coating | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model GA, SF, FX, etc. Produc... |
 |
Pure polyester weather-resistant powder coating Factory Supplier | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Product model OWP Product characteris... |
 |
Metallic flat semi-gloss Powder Coating MT-049/97003 | 卖方: Standard International Group (HK) Limited | Getaquote whats/app：+86 132 6275 2056 WEB: std-coatings.com Introduction No. MT-049/97003 Co... |
