Epoxy Zinc-Rich Primer

Instructions of Epoxy Zinc-Rich Primer

It is two components epoxy zinc-rich primer heavy corrosion by zinc primer paint, epoxy resin and other components. On steel surface treated to form a hard, wear-resistant, durable film, and provide long-lasting cathode protection.

Property of Zinc Rich Epoxy Primer Paint

Application of The Zinc Rich Epoxy Primer

Widely applicable to long-term anti-rust primer for steel primer, primer and maintenance, ships, bridges and other steel structures. Especially suitable for industrial, chemical, steel and other heavy-duty offshore matching zinc primer spray paint.

Surface Preparation of The Epoxy Zinc-Rich Prime

The surface roughness of steel welds, rounded edges and clear the splash-melt welding, cleared the surface of the grease, oil and other pollutants; surface sandblasted to ISO standard Sa2.5 level or power tools rust St3 level; surface roughness of 50-85um, before spraying to ensure the surface is dry and clean.

The weather is good, the substrate temperature of not less than 5 ℃, relative humidity <85%. It must have good ventilation conditions in confined areas to ensure proper drying of the film. Before fully cured coating should not be exposed to oil, chemicals or mechanical stress.

Coating Application of Zinc Rich Epoxy Paint

Mixing mass ratio: Base material (A): The curing agent (B) = 10: 1.

Theoretical amount: 220 g / m2.

Painting passes: spraying or brushing 2 to 3, 60 to 80 microns dry.

Mixing: Use a power mixer component A (base) Stir, then stirring state by mixing ratio of the added amount of group B (curing agent), and fully mixed, while stirring continued momentum needed painting.

Thinner or Cleaner: For supporting diluent.

Curing time: After mixed directly.

After mixing pot life: 5 hours (23 ℃).

The Construction Method of Epoxy Zinc-Rich Prime

Brush: Recommended for small areas, acute sites and pre-coated and refinishing, but must meet the specified dry film thickness.

Spraying: airless spray or air spray, the airless spray is recommended priority.

Air spray: a discharge pressure 0.4-0.7Mpa, nozzle diameter 1.8-2.2mm;

Airless Spray: discharge pressure 15Mpa, nozzle diameter 0.43-0.48mm;

* When used in spray paint, because the need to adjust the viscosity, can be added to a thinner 0-10%.

Precautions

3. ℃ dry heat.

Shelf Life of The Epoxy Zinc-Rich Prime

Twelve months from the date of manufacture in the original unopened container at 32°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat or ignition.

Package: 20 kg/ barrel.

Contact us get more details about Epoxy Zinc-Rich Primer Coating, such as TDS, Application Method, OEM etc.

Technical Data of The Epoxy Zinc-Rich Prime

UNCURED
Appearance	Thick paint
Viscosity	1700-2200 cP
Cure System	The catalyst cure
Table Dry
CURED At standard conditions (25℃and 50% relative humidity) for 5 days
Hardness	H ( pencil hardness)
Color	Colored
Gloss	Flat-high light
Adhesion	1

Ruisenas one of the mostprofessional silicone coating suppliers, we provide epoxy primer spray paint, zinc primer for steel, epoxy paint for steel, spraying epoxy paint, epoxy primer paint for steel, china rubber coatingand etc. Want to know more? Please contact us.

Другие товары поставщика

	Enhanced Anti-pollution Flashover Coating RTV-II	A functional insulator coating to protect insulators in pollution area, such as industrial area, coastal area and other extreme environmental condi...
	Composite Insulator	We offer different kinds of composite insulator for substation. Contact us get more details about composite insulator, such as TDS, Application Met...
	Anti-Algae & Anti-Fouling Coating	Leveraging upon our experience, we have become a prominent Anti-Algae & Anti-Fouling Coatings (RTV-ZB) Manufacturer, Exporter and Supplier in C...
	High Voltage Insulator Coating Series	Fujian RuiSenNew Materials Co., Ltd. was established in 2007, located in Fujian Province, China. RuiSen is the largest manufacturer of RTV Silicone...
	Hollow & Bushing Insulator	We offer different kinds of Hollow & Bushing Insulator for Substation, such as Circuit Breaker (CB), GIS, Post Insulator, Disconnector, Potenti...

Все товары поставщика

Похожие товары

	K11 Flexible Waterproof Coating	Продавец: Fujian Ruisen New Materials Co., Ltd.	In recent years, with the improvement of people's living standard, the living conditions of the r...
	Insulator & Electric Series	Продавец: Fujian Ruisen New Materials Co., Ltd.	As a professional porcelain insulator suppliersand ceramic insulator suppliers, we offer differen...
	Hollow & Bushing Insulator	Продавец: Fujian Ruisen New Materials Co., Ltd.	We offer different kinds of hollow porcelain insulator& Bushing Insulator for Substation, suc...
	High Voltage Insulator Coating Series	Продавец: Fujian Ruisen New Materials Co., Ltd.	High Voltage Insulator Coatings(HVIC) is used on excessive voltage insulators to forestall flasho...
	Epoxy Zinc-Rich Primer	Продавец: Fujian Ruisen New Materials Co., Ltd.	Instructions of Epoxy Zinc-Rich Primer It is two components epoxy zinc-rich primer heavy corro...