MT-500X Valve Core Grinding Bench

MT-500X Valve Core Grinding Bench

Stationary valve grinding machine is suitable for the valve disks of gate valves and globe valves,it is widely applied in coal-fired power petrochemical steel metallurgical paper and other industriesvalve grinded machineFeature:1、Stationary, more stable and durable2、double station design,Easy to operate, higher efficiency

1)diameter of Grinding disc: Dia500mm

2)Scope of Grinding:Dia25-Dia300mm

3)Quantity of grinding disc:2 pcs

4)Application : valve core of plane globe valve, gate valve .

5) Motor Power:1100W,Double motor.

6)Speed regulation mode:Variable frequency stepless speed regulation

7)Power supply: 220 V/50Hz

8) motor power: 1100W x2=2.2kw double motor

Stationaryvalve grinding machineis suitable for the valve disks of gate valves and globe valves,it is widely applied in coal-fired power petrochemical steel metallurgical paper and other industries

1．Connect the 380V power supply and turn on the total power supply.

2．Before starting the equipment, check whether there is any foreign body around the grinding disc and deal with it.

5. safety valve grinder machineOperation instructions:

(1) Device startup key: RUN Device stop key: STOP Forward and Reverse conversion key: JOG

(Note: when the forward and reverse conversion is done, the position of the triple lever should be adjusted accordingly).

Speed adjustment: knob on the panel rotation adjustment or up and down key adjustment.

(2) Other key suggestions should not be adjusted so as to avoid confusion.

(1) Before grinding the spool, adjust and fix the triple lever according to the size of the spool, and install the roller assembly on the triple lever, adjust the position and press firmly. Apply the corresponding abrasive grout on the grinding plate. (see grinding process)

(2) Grinding and repair of round spool.

The spool is placed in the middle of the angle between the three retaining bars and contacts with the roller to start the equipment for grinding. Or put the spool roller between the angle of the triple bar and contact with the roller, put one or more spools into the roller, start the equipment for grinding.

(3) Grinding of Gate valve spool:

Place the spool roller between the angle of the triple lever and contact the roller. Place one or more spools in the roller and start grinding.

(4) Hand held grinding:

The small spool with less damage will put the spool on the grinding disc, and start the equipment to carry out grinding by hand.

(5) the left and right two lapping plates are controlled by two transducers on the left side and the right side respectively, and the operation mode is the same.

6. safety valve testing machineGrinding process:

The abrasive paste with different sizes should be replaced according to different grinding needs. The abrasive paste is stirred and coated on the abrasive plate with machine oil. Before grinding, the high point burr on the spool should be removed before grinding.

1)Rough grinding:

Choose 60 -120# abrasive paste to remove defects such as groove marks, pits, scratches, etc.

2).Fine grinding:

Grinding around 240# or so is used to remove minor scratches.

3). Finish grinding:

More than 400 #grinding paste is used to finish the polishing.

Looking for Valve Grinding Machine, Valve Pressure Testing Table, Pipe Cutting Machine? Metals Kingdom waiting to create business relationship with you. With 24 years’ export experiences, our Valve Grinding Equipment, Valve Test Table, Valve Pressure Benchhave been welcomed in international markets. As fames China pipe beveling and cutting machine, High quality and factory price will give you.

If you are interested in our valve grinders, you can click hereto visit our website.

Другие товары поставщика

	M-300 Portable Gate Valve Grinding Machine	M-300 Portable Gate Valve Grinding Machine Portable Valve Grinding and Lapping Machine For Gate Valves Technical Parameter 1)Applicstion:Gate Val...
	M-100 Portable Safety Valve Grinding Machine	M-100 Portable Safety Valve Grinding Machine Application:Cone globe valve seat,Flat Globe valve seat.Grinding scope:Cone globe valve seat: Φ...
	Horizontal Type SYTW800/5.8-32 Valve Test Bench Horizontal Type Valve Pressure Test Bench Valve Pressure Test Bench	Horizontal TypeValvePressure Test Bench This test bench is designed and manufactured with reference to similar products of Germany and GB4981 ...
	PKN-400 Portable Inner Clamping Pipe Beveling Machine	PKN Inner Clamped Pipe Beveling Machine PKN series pipe beveling machineis an inner up mounted card type pipe beveling machine, using single phas...
	Portable Gate Valve Grinder for Dn200-600mm.	Manufacturer of Valve grinder from China ,Metals Kingdom Industry LimtedM-600 Portable Valve Grinding Machine1.Characrer:M-600 portable valve grind...

Все товары поставщика

Похожие товары

	HM Pumex Grinding Machine	Продавец: Shenzhen JuYongNeng Technology Co., Ltd	HM Pumex Grinding Machine Product Description Name TSP HM3/6-75 S/Z...
	Электрическая шлифовальная ручка XZZ Z1 Pro для полировки микросхем	Продавец: Phonefix	Электрическая полировальная ручка XZZ Z1 Pro с различными шлифовальными головками для различных т...
	Scraper Grinding Machine	Продавец: Kunshan Dekaisheng Edge Mold Co.,Ltd	Usage： Our commpany develops and produces fully automatic and speed adjustable blade grinder with...
	Компактная электрическая шлифовальная ручка для полировки ИС	Продавец: PHONEFIX technology Co.,Ltd	ОписаниеE288-02 небольшая ручная шлифовальная машинка мини материнская плата ЦП полировка ИС ручк...
	250mm 10 Inch Diamond Grinding Plates For Concrete	Продавец: Xiamen ChinShine Industry and Trade Corporation	ChinShine designed this new style China diamond grinding shoe was perfect for grinding concrete, ...