MMA Two-Component Acrylate Adhesive
Introduction
2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bonding strength, good toughness, and good aging resistance.
This type of adhesivecan cure at room temperature or high temperature. Under hot pressing, it can complete initial curing in 1-2 minutes. Under room temperature curing, it can reach a final strength of 30% in about 10 minutes.
It has a good bonding effect on various substrates, such as metal, plastic, glass, etc. 2K-MMA two-component acrylic adhesive is widely used for structural bonding in consumer electronics, such as laptops, tablets, mobile s, and TWS ears.
| Property | 2K-MMA Two-Component Acrylic Adhesive |
|---|---|
| Composition | Methyl methacrylate (MMA) monomer + curing agent (e.g., peroxide). |
| Curing Method | Room-temperature or heat-activated polymerization (exothermic reaction). |
| Key Applications | Structural bonding (metals, composites), automotive panels, aerospace components, loudspeaker magnet assembly. |
| Advantages | Rapid curing (minutes), high shear/peel strength, low-temperature flexibility, no volatile organic compounds (VOCs). |
| Limitations | Requires precise mixing ratio (short pot life after mixing), may yellow over time. |
| Distinct Features | Bonds dissimilar materials (e.g., metal-plastic), forms flexible yet strong joints, resists impact/vibration. |
Comparison with Epoxy:
Curing: 2K-MMA cures via polymerization (no external heat needed), while epoxy requires heat or specific conditions.
Flexibility: 2K-MMA retains flexibility post-cure, whereas epoxy is rigid.
Speed: 2K-MMA sets faster (2–5 minutes) than most epoxy systems.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Rheology modifier STD-9012 | Introduction Composition: Polyurea mixture solution Appearance: yellow transparent solution Active ingredient: 50% Solvent: N-methylpyrrolidone... |
 |
Adhesive for Camera Module | Introduction With the increasing demand for consumer electronics and the development of autonomous driving in automobiles, the demand for camera m... |
 |
Indanthrone Blue CAS 81-77-6 | Introduction TestItem Specification Contofwater%≤ 2.5 Soluble matter in water %≤ 2.0 Oil a... |
 |
Substrate wetting additive STD-204E | Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene glycol Applic... |
 |
CAS 4415-87-6 | Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
