MMA Two-Component Acrylate Adhesive
Introduction
2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bonding strength, good toughness, and good aging resistance.
This type of adhesivecan cure at room temperature or high temperature. Under hot pressing, it can complete initial curing in 1-2 minutes. Under room temperature curing, it can reach a final strength of 30% in about 10 minutes.
It has a good bonding effect on various substrates, such as metal, plastic, glass, etc. 2K-MMA two-component acrylic adhesive is widely used for structural bonding in consumer electronics, such as laptops, tablets, mobile s, and TWS ears.
| Property | 2K-MMA Two-Component Acrylic Adhesive |
|---|---|
| Composition | Methyl methacrylate (MMA) monomer + curing agent (e.g., peroxide). |
| Curing Method | Room-temperature or heat-activated polymerization (exothermic reaction). |
| Key Applications | Structural bonding (metals, composites), automotive panels, aerospace components, loudspeaker magnet assembly. |
| Advantages | Rapid curing (minutes), high shear/peel strength, low-temperature flexibility, no volatile organic compounds (VOCs). |
| Limitations | Requires precise mixing ratio (short pot life after mixing), may yellow over time. |
| Distinct Features | Bonds dissimilar materials (e.g., metal-plastic), forms flexible yet strong joints, resists impact/vibration. |
Comparison with Epoxy:
Curing: 2K-MMA cures via polymerization (no external heat needed), while epoxy requires heat or specific conditions.
Flexibility: 2K-MMA retains flexibility post-cure, whereas epoxy is rigid.
Speed: 2K-MMA sets faster (2–5 minutes) than most epoxy systems.
在线联系供应商
Other supplier products
 |
CAS 615-50-9 2,5-Diaminotoluene sulfate | 615-50-9 – Names and Identifiers Name 2,5-Diaminotoluene sulfate CAS 615-50-96369-59-1 EINECS 210-431-8 InChI InChI... |
 |
CAS 54914-85-1 EGTE 1,2-Bis(3-methylphenoxy)ethane | Introduction CAS:54914-85-1, 54914-85-1 – Names and Identifiers Name 1,2-Bis-(3-methyl-phenoxy)ethane Synonyms F-203(EGTE)1,2... |
 |
Acrylic polyol resin MT-7152-80 | Introduction Characterization Acrylic polyol resin designed for high solid low VOC ACE top coating Form supplied Form supplied is approximately... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
Acrylate Instant Adhesive | Introduction MT941/MT912/MT994 series: One component quick curing, solvent-free cyanoacrylate adhesive. The product covers various specifications... |
Same products
 |
Epoxy/Polyester Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | 卖方: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | 卖方: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
