polyester poly （MT670 BAC）

Use:

Binder for coating materials

Relevant identified uses of the substance or mixture and uses advised against

Type of product: Mixture

Mixtures

polyester polyol

ca. 80 % in n-butyl acetate

Emergency overview

yellowish, liquid, solvent-like. Flammable liquid and vapour. May cause drowsiness or dizziness

Classification of the substance or mixture

GHS Classification:

Flammable liquids, Category 3 (H226)

Specific target organ toxicity (single exposure), Category 3 (H336) (Narcotic effects)

Mixtures

polyester polyol

ca. 80 % in n-butyl acetate

Hazardous components

n-Butyl acetate

Concentration [wt.-%]: ca. 20

GHS Classification: Flam. Liq. 3 H226 STOT SE 3 H336 (Central nervous system)

Trimethylolpropane

Concentration [wt.-%]: ca. 0.5

GHS Classification: Repr. 2 H361f

Description of first aid measures

General advice: Take off all contaminated clothing immediately.

If inhaled: Take the person into the fresh air and keep him warm, let him rest; if there is difficulty in breathing,

medical advice is required.

In case of skin contact: In case of skin contact wash affected areas thoroughly with soap and plenty of

water. Consult a doctor in the event of a skin reaction.

In case of eye contact: Hold the eyes open and rinse with preferably lukewarm water for a sufficiently long

period of time (at least 10 minutes). Contact an ophthalmologist.

If swallowed: DO NOT induce the patient to vomit, medical advice is required

Precautions for safe handling

Provide sufficient air exchange and/or exhaust in work rooms.

Provided good ventilation and/or local exhaust systems are used, the Workplace Exposure Limit(s) stated in

section 8 should not be exceeded.

Explosion protection required.

The personal protective measures described in section 8 must be observed. The precautions required in the

handling of solvents must be taken. Avoid contact with skin and eyes and the inhalation of vapor.

Keep away from foodstuffs, drinks and tobacco. Wash hands before breaks and at the end of workday. Keep

working clothes separately. Change contaminated or soaked clothing.

Respiratory protection

Respiratory protection required in insufficiently ventilated working areas and during spraying.

Hand protection

Suitable materials for safety gloves; EN 374:

Laminate glove – PE/EVOH/PE; breakthrough time >=480 min.

In the event of contamination, change protective gloves immediately. Recommendation: contaminated gloves

should be disposed of.

Eye protection

Wear eye/face protection.

Skin and body protection

Wear suitable protective clothing.

Другие товары поставщика

	Substrate wetting additive STD-204E	Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene glycol Applic...
	MBTS (DM) CAS 120-78-5	120-78-5 –Names and Identifiers Name Accelerator (DM) Synonyms DMMBTSacceltmAccel TMAcceleratorDMAcelerator DMbenzothiazolylAcc...
	CAS 110-12-3 Methyl Isoamyl Ketone (MIAK)	Names and Identifiers Name 5-Methyl-2-hexanone CAS 110-12-3 EINECS 203-737-8 InChI InChI=1/C8H9BrO/c/h1-5,8,10H,6H2/t8-/m...
	Polyester based powder coating	Product Description MT-OA010G is a polyester based powder coating, formulated without TGIC. Powder Properties Chemical type Polyester TGI...
	polyester poly （MT670 BAC）	Introduction Use: Binder for coating materials Relevant identified uses of the substance or mixture and uses advised against Type of prod...

Все товары поставщика

Похожие товары

	Epoxy/Polyester Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	Продавец: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...