Non Modified Cellulose Ether

• 

Introduction

Non Modified Cellulose Ether

To improve the workability properties of Portland cement and gypsum based dry mortars, such as plaster, render, tile adhesive and EIFS mortar.

Storage

Non Modified Cellulose Ether is non-perishable product. It is recommended to use the products in rotating on a first in first out basis. The products should be stored under dry and clean conditions in its original packaging and away from heat.The products are hydroscopic. The packaging is selected in a way to avoid ingress of moisture, but the water content of the packed product will / may increase if not stored dry.

Product safety

According to the EU legislation on dangerous substances and preparations, Non Modified Cellulose Ether is not hazardous. Further data on the safety aspects of Non Modified Cellulose Ether types are given in the Safety Data Sheets.

Customer notice and Disclaimer

The products and related information provided by MT are for manufacturing use only. MT makes no express, implied, or other representation, warranty, or guarantee concerning.

(I) the handling, use, or application of such products, whether alone, in combination with other products, or otherwise,

(II) the completeness, definitiveness, or adequacy of such information for user’s or other purpose,

(III) the quality of such products, except that such products are of MT’s standard quality. Users are advised to make their own tests to determine the safety and suitability of each such product combination for their own purpose. Read and understand the Material Safety Data Sheet (MSDS) before using this product. MT does not recommend any use of its products that would violate ant patent or other rights.

Другие товары поставщика

	CAS 4415-87-6	Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1...
	CAS	4-Fluoro-1.3-dioxolan-2-one CAS Purity / Analysis Method >98.0%(GC) Molecular Formula / Molecular Weight C3H3FO3= 106.05 Phy...
	Diethylene Glycol Monobutyl Ether Acetate CAS 124-17-4	Introduction Ethylene glycol butyl ether acetate is a high boiling point, multifunctional binary alcohol ether ester solvent, which can be used as...
	Adhesive for optical communication	In the field of fiber optic assembly industry, our product line includes single/two-component epoxy based adhesives, UV cured acrylic adhesives, an...
	Substrate wetting additive STD-204E	Introduction Composition: Non-silicone surfactant mixture Appearance: light yellow transparent liquid Active ingredient: 50% Solvent: ethylene ...

Похожие товары

	Epoxy/Polyester Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	Продавец: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...