Silicone fluid（MT6000 ）

• 

PRODUCT DESCRIPTION

MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid.

APPLICATIONS

• Thermostatic fluids (-50°C – 200°C)

• Dielectric fluids (impregnation of paper for condensers)

• Anti-blotting products for photocopying machines.

• Thinning and plastifying agents for RTV’s and silicone sealants.

• Lubricating and heat protecting agents for textile threads (synthetic sewing threads)

• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).

• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).

• Water repellent treatment:

– of powders ( for paints and plastics)

– of fibres : glass fibres

• Release agents (mould release for plastics and metal castings)

• Surfactants for styrene-butadiene foam.

Typical Properties

• Very good resistance to high and low temperatures

• Good combustion resistance

• Good dielectric properties

• Low surface tension

• High compressibility

• Absence of ageing upon exposure to atmospheric agents

• Good oxidation resistance

• Little change in viscosity with temperature

• Good resistance to high and prolonged shear stress

STORAGE AND HANDLING

When stored in the original unopened packaging at a temperature of between –20°C and 50°C, MT6000 may be stored for up to 2 years from its date of manufacture (expiry date). Comply with storage instructions and expiry date marked on the packaging.and recommendations made by material safety datasheet be observed at all times.

PRODUCT SAFETY

The Safety Data Sheet (SDS) should always be read and completely understood prior to the handling of any chemical product. It is important that adequate safety procedures are followed by the user. Information on the toxicity, environmental and industrial hygiene aspects of products may be found in the SDS.

Другие товары поставщика

	Leveling agent STD-236N	Composition: Polyether modified silicone oil Appearance: light yellow viscous liquid Active ingredient: 100% Solvent: None Application range: ...
	Adhesive for micro speakers	With the development of electronic products, speakers are developing in the direction of small cavity, ultra-thin, high sound quality, and high pow...
	Industrial formaldehyde	Introduction Formaldehyde, chemical formula or HCHO or CH2O, formula 30.03, also known as ant aldehyde, explosion limit: 7.0-73%. It has a strong ...
	Acrylic polyol resin MT-7152-80	Introduction Characterization Acrylic polyol resin designed for high solid low VOC ACE top coating Form supplied Form supplied is approximately...
	6PPD-L CAS 793-24-8	793-24-8 –Names and Identifiers Name N-1,3-dimethylbutyl-N’-phenyl-p-phenylenediamine Synonyms BHTOX-4020Flexzone 7FVulka...

Похожие товары

	Epoxy/Polyester Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ...
	Polyester Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	This series of product are made of polyester resin (as hardener) and highly transparentmaterials....
	Acrylic Clear Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar...
	Polyurethane Powder Coatings	Продавец: Standard International Group (HK) Limited	Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ...
	MDF Powder Coating	Продавец: Standard International Group (HK) Limited	Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are...