Silicone fluid（MT6000 ）
PRODUCT DESCRIPTION
MT6000 is a silicone fluid based on straight chained polydimethylsiloxane fluid.
APPLICATIONS
• Thermostatic fluids (-50°C – 200°C)
• Dielectric fluids (impregnation of paper for condensers)
• Anti-blotting products for photocopying machines.
• Thinning and plastifying agents for RTV’s and silicone sealants.
• Lubricating and heat protecting agents for textile threads (synthetic sewing threads)
• Ingredients in maintenance products (polishes, wax polishes, floor and furniture polishes, etc.).
• Paint additives (anti-cratering, anti-floating/flooding and anti-scratching effects, etc.).
• Water repellent treatment:
– of powders ( for paints and plastics)
– of fibres : glass fibres
• Release agents (mould release for plastics and metal castings)
• Surfactants for styrene-butadiene foam.
Typical Properties
• Very good resistance to high and low temperatures
• Good combustion resistance
• Good dielectric properties
• Low surface tension
• High compressibility
• Absence of ageing upon exposure to atmospheric agents
• Good oxidation resistance
• Little change in viscosity with temperature
• Good resistance to high and prolonged shear stress
STORAGE AND HANDLING
When stored in the original unopened packaging at a temperature of between –20°C and 50°C, MT6000 may be stored for up to 2 years from its date of manufacture (expiry date). Comply with storage instructions and expiry date marked on the packaging.and recommendations made by material safety datasheet be observed at all times.
PRODUCT SAFETY
The Safety Data Sheet (SDS) should always be read and completely understood prior to the handling of any chemical product. It is important that adequate safety procedures are followed by the user. Information on the toxicity, environmental and industrial hygiene aspects of products may be found in the SDS.
Send product request
Other supplier products
 |
Solvent Adhesive Series Products | Introduction The series of solvent based adhesive products includes single/two-component moisture cured solvent based polyurethane adhesives, as w... |
 |
MS modified silane sealant | Introduction Modified silane sealant, environmentally friendly, has a wide range of adhesive properties, no need for primer, UV protection, no sol... |
 |
polymeric isocyanate (MT-44V20) | Introduction General Properties and Applications MT44V20 is a liquid, dark brown polymeric isocyanate based on diphenylmethane-4,4′-dii... |
 |
Hydroxymethyl | Introduction This type of product is mainly made by hydroxymethylation reaction of melamine and formaldehyde with different molar ratios. The fini... |
 |
S-TMQ CAS 26780-96-1 TMQ | Introduction Chemical Name:Polymer of 2,2,4-trimethyl-1,2-dihydroquinoline CAS NO.:26780-96-1 Product Specification: Appearance Amber to... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
