CAS 2417-04-1 4,4′-dihydroxy-3,3′,5,5′-tetramethyl-biphenyl TMDE
Introduction
2417-04-1 – Names and Identifiers
| Name | 4,4′-dihydroxy-3,3′,5,5′-tetramethyl-biphenyl |
| Synonyms | TMDHB GS3000,TMDE |
| CAS | 2417-04-1 |
| InChI | InChI=1/C16H18O2/c/h5-8,17-18H,1-4H3 |
2417-04-1 – Risk and Safety
| Risk Codes | R36/37/38 – Irritating to eyes, respiratory system and skin. R40 – Limited evidence of a carcinogenic effect |
| Safety Description | S26 – In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36 – Wear suitable protective clothing. S22 – Do not breathe dust. |
2417-04-1 – Physico-chemical Properties
| Molecular Formula | C16H18O2 |
| Molar Mass | 242.31 |
| Density | 1.0537 (rough estimate) |
| Melting Point | 222-225°C(lit.) |
| Boling Point | 345.14°C (rough estimate) |
| Flash Point | 162.4°C |
| Solubility | DMSO (Slightly), Methanol (Slightly) |
| Vapor Presure | 1.62E-05mmHg at 25°C |
| Appearance | Solid |
| Color | Pale Beige to Light Beige |
| pKa | 10.22±0.40(Predicted) |
| Storage Condition | Sealed in dry,Room Temperature |
| Refractive Index | 1.6000 (estimate) |
| Physical and Chemical Properties | Appearance off-white powder melting point 223.0-230.0 ℃ content ≥ 98.5%(LC) volatile ≤ 0.3% ash ≤ 0.5% |
| Use | Synthesis of phenol-oxygen resin. Phenolic resin is mainly involved in blending, used as a modifier of plastics, adhesives, coatings and other resins, in the electronic computer parts, electrical instrument parts and food or drug hard packaging and other aspects of a wide range of applications. With 3, 3 ‘, 5, 5’-tetramethyl-4, 4 ‘-biphenol as monomer, The phenoxy resin containing biphenyl structure was prepared, the glass transition temperature of the polymer can be effectively increased. Synthesis of 3,3 ‘,5,5’-tetramethylbiphenol diglycidyl ether. |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Three proof adhesive | Three proof adhesive,also known as circuit board protective adhesive or coating adhesive, is applied to the surface of the circuit board to form a ... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
MMA Two-Component Acrylate Adhesive | Introduction 2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bonding strength, good toughness, and goo... |
 |
Polyurethane Powder Coatings | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance -Good transfer print ability -Better performance... |
 |
Non Modified Cellulose Ether | Introduction Non Modified Cellulose Ether To improve the workability properties of Portland cement and gypsum based dry mortars, such as plaster,... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
|
|
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
