S-TMQ CAS 26780-96-1 TMQ
Introduction
Chemical Name:Polymer of 2,2,4-trimethyl-1,2-dihydroquinoline
CAS NO.:26780-96-1
Product Specification:
| Appearance | Amber to Brown Pastilles | |
| Total content of dimer and trimer(HPLC),% |
≥ | 70.0 |
| Isopropyl bis aniline content(HPLC),% | ≤ | 0.20 |
| Content of 4-ADPA,% | 80.0-100.0 | |
| Heat Loss(55±2°C ),% | ≤ | 0.20 |
| Ash,% | ≤ | 0.20 |
◆Performance:
-S-TMQ is a high-performance quinoline antioxidant with much higher effective body content than TMQ;
As the content of dimer and trimer in S-TMQ is high, it has excellent heat, oxidative aging and fatigue resistance performance;
Compared with TMQ, S-TMQ has very low content of non-effective body, which has a little impact on the reducibility of insoluble sulfur and can improve the adhesion between rubber and steel wire;
-S-TMQ has low volatility and pollution.
◆Application:
-S-TMQ can be applied to all kinds of rubber products such as tires, rubber tubes, rubber belts, etc.;
-S-TMQ is recommended to be used tire belt, body ply compounds, which can improve cord performance.
◆Packaging:Paper/plastic packages with a net weight of 20kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine and rain, keeping away from hot source.
26780-96-1 –Physico-chemical Properties
| Molecular Formula | C12H15N |
| Molar Mass | 173.25 |
| Density | 1.08 |
| Melting Point | 72-94°C |
| Boling Point | >315°C |
| Flash Point | 158.8°C |
| Water Solubility | <0.1 g/100 mL at 23 ºC |
| Solubility | <0.1 g/100 mL at 23°C |
| Vapor Presure | 0Pa at 25℃ |
| Appearance | Yellow |
| Storage Condition | 2-8°C(protect from light) |
| Refractive Index | 1.4870 (estimate) |
| Physical and Chemical Properties | Density 1.08 melting point 72-94°C boiling point> 315°C water solubility <0.1g/100 mL at 23°C |
| Use | Mainly used as rubber antioxidant, suitable for natural rubber and nitrile, styrene, Ethylene Propylene and chloroprene and other synthetic rubber |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Promoter TBSI CAS 3741-80-8 VANAX CPA | Introduction Chemical Name:N-tert-butyl-bis-(2-benzothiazolesulfen)amide CAS NO.:3741-80-8 Product Specification: Appearance Whitish Pow... |
 |
Automotive Interior – Reactive Polyurethane Hot Melt Adhesive (PUR) | Automotive Interior Polyurethane Adhesive: Innovation in Vehicle Design Polyurethane (PU) adhesives have revolutionized automotive interior assemb... |
 |
Thermal interface material | Thermal conductive sealant There are two types of thermal conductive joint fillers: silicon-based and non silicon. They are usually two-component ... |
 |
Aliphatic polyisocyanate (flexibilizing HDI trimer)-MT3800 | Introduction Characterization MT3800 is an aliphatic polyisocyanate (flexibilizing HDI trimer).It is suitable for use as the hardener compone... |
 |
Adhesion promoters STD-7255 | Description STD-7255 is a linear polyester with active hydrogen atoms adhesion promoter. It is suitable for self dry solvent coating systems. STD... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
