S-TMQ CAS 26780-96-1 TMQ
Introduction
Chemical Name:Polymer of 2,2,4-trimethyl-1,2-dihydroquinoline
CAS NO.:26780-96-1
Product Specification:
| Appearance | Amber to Brown Pastilles | |
| Total content of dimer and trimer(HPLC),% |
≥ | 70.0 |
| Isopropyl bis aniline content(HPLC),% | ≤ | 0.20 |
| Content of 4-ADPA,% | 80.0-100.0 | |
| Heat Loss(55±2°C ),% | ≤ | 0.20 |
| Ash,% | ≤ | 0.20 |
◆Performance:
-S-TMQ is a high-performance quinoline antioxidant with much higher effective body content than TMQ;
As the content of dimer and trimer in S-TMQ is high, it has excellent heat, oxidative aging and fatigue resistance performance;
Compared with TMQ, S-TMQ has very low content of non-effective body, which has a little impact on the reducibility of insoluble sulfur and can improve the adhesion between rubber and steel wire;
-S-TMQ has low volatility and pollution.
◆Application:
-S-TMQ can be applied to all kinds of rubber products such as tires, rubber tubes, rubber belts, etc.;
-S-TMQ is recommended to be used tire belt, body ply compounds, which can improve cord performance.
◆Packaging:Paper/plastic packages with a net weight of 20kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine and rain, keeping away from hot source.
26780-96-1 –Physico-chemical Properties
| Molecular Formula | C12H15N |
| Molar Mass | 173.25 |
| Density | 1.08 |
| Melting Point | 72-94°C |
| Boling Point | >315°C |
| Flash Point | 158.8°C |
| Water Solubility | <0.1 g/100 mL at 23 ºC |
| Solubility | <0.1 g/100 mL at 23°C |
| Vapor Presure | 0Pa at 25℃ |
| Appearance | Yellow |
| Storage Condition | 2-8°C(protect from light) |
| Refractive Index | 1.4870 (estimate) |
| Physical and Chemical Properties | Density 1.08 melting point 72-94°C boiling point> 315°C water solubility <0.1g/100 mL at 23°C |
| Use | Mainly used as rubber antioxidant, suitable for natural rubber and nitrile, styrene, Ethylene Propylene and chloroprene and other synthetic rubber |
Send product request
Other supplier products
 |
Sealing application adhesive | Introduction Polyurethane and epoxy resin materials, different models of products can provide targeted insulation strength, flame retardant perfor... |
 |
2K-MMA two-component acrylic adhesive | 2K-MMA two-component acrylic adhesive is a structural adhesive with fast curing speed, high bonding strength, good toughness, and good aging resist... |
 |
CAS 4415-87-6 | Introduction of the Polyimide Polyimide (sometimes abbreviated PI) is a polymer of imide monomers. Polyimides have been in mass production since 1... |
 |
Coating for Busbar by Electrostatic Spray Application | Product Description MT-EL-HLF59R is a one part, 100 % solids, epoxy powder coating for insulation of wire and busbars. Designed for electrostatic ... |
 |
Epoxy Adhesive | MT 4003/5112/3042/4512LV series and EP242 series: The characteristics of good toughness, wide applicable temperature, and moderate activation time... |
Same products
 |
Epoxy/Polyester Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Seller: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Seller: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Seller: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Seller: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
