TBBS (NS) CAS 95-31-8 N-tert-butylbenzothiazole-2-sulphenamide
Introduction
Chemical Name:N- tert- butyl- 2- benzothiazole sulfenamide
CAS NO.:95-31-8
Product Specification:
| Appearance | White or light yellow powder/Pastille | |
| Purity（GC）,% | ≥ | 96.0 |
| Melting Point(Initial),°C | ≥ | 104.0 |
| Heat Loss,% | ≤ | 0.40 |
| Ash,% | ≤ | 0.30 |
| Residue on sieve(150μm),% | ≤ | 0.10 |
| Insoluble in methanol,% | ≤ | 1.0 |
| Free amine,% | ≤ | 0.50 |
◆Performance:Siceler TBBS is kind of accelerator with delayed action, excellent scorch resistance, safe processing and rapid curing speed.
◆Application:Siceler TBBS is used as delayed action accelerator for NR, BR, IR, SBR and reclaimed rubber of NR. It is mainly used in the production of rubber products such as tires, rubber shoes, rubber tubes, rubber belt, cables, etc.
◆Packaging:Paper/plastic packages with a net weight of 25kg per package.Or FIBC with a net weight 500kg per package.
◆Transportation Condition:Clear vehicle with ceiling, avoiding sunshine, rain and long-term extrusion，keeping away from hot source.
95-31-8 –Physico-chemical Properties
| Molecular Formula | C11H14N2S2 |
| Molar Mass | 238.37 |
| Density | 1,29 g/cm3 |
| Melting Point | 105°C |
| Boling Point | 344.1±25.0 °C(Predicted) |
| Flash Point | 165°C |
| Vapor Presure | 6.72E-05mmHg at 25°C |
| BRN | 158370 |
| pKa | 1.25±0.70(Predicted) |
| Storage Condition | Keep in dark place,Sealed in dry,Room Temperature |
| Refractive Index | 1.5500 (estimate) |
| Physical and Chemical Properties | Chemical properties light yellow brown powder. Soluble in benzene, dichloromethane, carbon tetrachloride, ethyl acetate, acetone, ethanol, soluble in gasoline, insoluble in water. |
| Use | Uses This product is a natural rubber, butadiene rubber, isoprene rubber, styrene butadiene rubber and reclaimed rubber aftereffect accelerator, especially suitable for carbon black rubber with strong alkaline content. It is safe at operating temperature, strong scorch resistance, fast vulcanization speed, high constant elongation strength, and can improve the use ratio of synthetic rubber. Low toxicity and high efficiency, it is an ideal substitute for NOBS, has excellent comprehensive performance, and is called a standard accelerator. Widely used in the production of radial tires. It can be used with aldehydes, guanidines, and thiuram accelerators, and when combined with anti-scorch agent PVI, it forms a good vulcanization system. Mainly used in the manufacture of tires, rubber shoes, rubber hoses, tapes, and cables. |
95-31-8 –Risk and Safety
| Risk Codes | R43 – May cause sensitization by skin contact R53 – May cause long-term adverse effects in the aquatic environment |
| Safety Description | S36 – Wear suitable protective clothing. S45 – In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.) S61 – Avoid release to the environment. Refer to special instructions / safety data sheets. S37 – Wear suitable gloves. S24 – Avoid contact with skin. |
| UN IDs | 3077 |
| RTECS | DL6200000 |
| TSCA | Yes |
| HS Code | 29342000 |
| Hazard Class | 9 |
| Packing Group | III |
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Art Supplies Coloring | Introduction The series of educational and artistic colorants excels in washability on skin and fabrics. They boast a wide spectrum of radiant... |
 |
Three proof adhesive | Introduction Three proof adhesive,also known as circuit board protective adhesive or coating adhesive, is applied to the surface of the circuit bo... |
 |
Powder Coating for Electrostatic Spray Application on Cold Surfaces | Product Description MT R4-ES HJ601R is a high quality thermosetting epoxy powder coating for the corrosion protection of valves and fittings, manu... |
 |
Leveling agent STD-1392 | Composition: Modified acrylate copolymer solution Appearance: light yellow transparent solution Active ingredient: 50% Solvent: Dipropylene glyc... |
 |
Hydroxymethyl | Introduction This type of product is mainly made by hydroxymethylation reaction of melamine and formaldehyde with different molar ratios. The fini... |
Похожие товары
 |
Epoxy/Polyester Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Good bond ability and mechanical performance -Smooth and glossy -Certified chemical ... |
 |
Polyester Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | This series of product are made of polyester resin (as hardener) and highly transparentmaterials.... |
 |
Acrylic Clear Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature: -Excellent exterior exposure durability -Excellent durable high gloss -Excellent clar... |
 |
Polyurethane Powder Coatings | Продавец: Standard International Group (HK) Limited | Feature： -Excellent exterior exposure durability -Good flowing -Excellent chemical resistance ... |
 |
MDF Powder Coating | Продавец: Standard International Group (HK) Limited | Feature： -Environmental friendly -No solvents and volatile organic compounds involved which are... |
